Gas tank bladder.
Thread Starter
Pro
Joined: Mar 2004
Posts: 607
Likes: 9
From: Sandy Eggo, California
Gas tank bladder.
While installing my Z06 cat back exhaust, I removed the bottom skid pan from the right side gas tank bladder to make it a little easier to remove the stock exhaust from that side. The tank was full, so the bladder being pliable, started to droop down about an inch or so when I removed the botom pan. I had to push it back up unto position to reinstall the lower pan. Anyone know if any problems that may develop from physically pushing the bladder back up into its original position? Thanks in advance for any assistance.
Administrator
Joined: Mar 2001
Posts: 368,638
Likes: 24,868
From: In a parallel universe. Currently own 2014 Stingray Coupe.
C7 of the Year - Modified Finalist 2021
MO Events Coordinator
St. Jude Co-Organizer
St. Jude Donor '03 thru '26
NCM Sinkhole Donor
CI 5, 8 & 11 Veteran
I wouldn't think so, but maybe Patches or C5 TECH can shed some light on this.
Former Vendor
Joined: Apr 2001
Posts: 10,976
Likes: 21
From: FL
St. Jude Donor '13
Once the bottom plate is removed,the only thing holding the tank in is the crossover pipe connected between the 2 tanks.This pipe is flexable which will allow a full tank to lower 
No harm done 
No harm done
