seam sealer pn
Team Owner
Joined: Sep 2001
Posts: 23,283
Likes: 906
From: Lake Elsinore, CA
I found bonding adhesives specified in the body repair manual depending on area of repair.
This is for the rear tub, rocker rails, etc.:
SI RAIL
ADHESIVE
Important: Use US Chemical and Plastics
82007B System 2000 Structural Adhesive,
a PLIOGRIP® adhesive manufactured by
Ashland Chemical Company, or equivalent.
Note the 30 minute working time and 2.5
to 3 hour cure time.
This is for the roof bow, floor panels, fender wells and other spots:
Important: Use US Chemical and Plastics
82014B System 2000 Structural Adhesive,
a PLIOGRIP® adhesive manufactured by
Ashland Chemical Company, or equivalent.
Note the 9 minute working time and 1
hour cure time.
These are used for the rear compartment:
Important: Use US Chemical and Plastics
82006B System 2000 Structural Adhesive,
a PLIOGRIP® adhesive manufactured by
Ashland Chemical Company, or equivalent.
Note the 3 minute working time and 15
minute cure time.
Important: Use Ashland Chemical Pliogrip
7779/300B adhesive, or equivalent. Notice
the 10-minute working time, and one hour
cure time.
This is for the rear tub, rocker rails, etc.:
SI RAIL
ADHESIVE
Important: Use US Chemical and Plastics
82007B System 2000 Structural Adhesive,
a PLIOGRIP® adhesive manufactured by
Ashland Chemical Company, or equivalent.
Note the 30 minute working time and 2.5
to 3 hour cure time.
This is for the roof bow, floor panels, fender wells and other spots:
Important: Use US Chemical and Plastics
82014B System 2000 Structural Adhesive,
a PLIOGRIP® adhesive manufactured by
Ashland Chemical Company, or equivalent.
Note the 9 minute working time and 1
hour cure time.
These are used for the rear compartment:
Important: Use US Chemical and Plastics
82006B System 2000 Structural Adhesive,
a PLIOGRIP® adhesive manufactured by
Ashland Chemical Company, or equivalent.
Note the 3 minute working time and 15
minute cure time.
Important: Use Ashland Chemical Pliogrip
7779/300B adhesive, or equivalent. Notice
the 10-minute working time, and one hour
cure time.
