Need help with frame around windshield!
Thread Starter
Drifting
Joined: Sep 2004
Posts: 1,835
Likes: 295
From: Phoenix AZ
Need help with frame around windshield!
I had the windshield on my 2000 C5 replaced by Autolite Glass this week and they buggered up the plastic interior trim piece that goes from the right side of the dashboard, along the windshield, to the top of the roof.
This is the trim piece many people run their radar detector wires behind.
How hard is it to remove and replace this piece?
If Autolite is willing to pay for the piece, would be easy for me to install?
Thanks!
Rob
This is the trim piece many people run their radar detector wires behind.
How hard is it to remove and replace this piece?
If Autolite is willing to pay for the piece, would be easy for me to install?
Thanks!
Rob
Race Director
Joined: Aug 2003
Posts: 16,270
Likes: 30
From: "It's 106 miles to Chicago, we've got a full tank of gas, half a pack of cigarettes, it's dark, and
St. Jude Donor '03-'04-'05-'06-'07-'08-'09-'10-'11-'12-'13-'14-'15-'16-'17-‘18-'19
NCM Sinkhole Donor
If you're talking about the A pillar - it just snaps on and off with clips. Piece of cake! 
Racer
Joined: Aug 2004
Posts: 290
Likes: 0
From: Belpre Ohio
when i had my windshield tinted i removed my pillar moldings for more room....i just pulled from the top of the molding toward the radio area...just a diagonal pull...and there are little black push-in plastic retainers at the bottom...easy to remove.....
Josh
Josh
