Aluminum Pedal Install
Dec 16, 2004 | 09:37 AM
Thread Starter
Pro
Joined: Jan 2004
Posts: 707
Likes: 0
From: IA
Aluminum Pedal Install
I got the aluminum gas and dead pedal for my birthday and was looking at the instructions for the gas pedal. It says to pull a pin and spring and replace with existing spring and screw provided. Does the screw replace a pin in this case?
Dec 16, 2004 | 10:06 AM
Joined: Aug 2003
Posts: 3,641
Likes: 7
From: Beautiful CO
St. jude Donor '14
Quote:
Originally Posted by SilverRoadster00
I got the aluminum gas and dead pedal for my birthday and was looking at the instructions for the gas pedal. It says to pull a pin and spring and replace with existing spring and screw provided. Does the screw replace a pin in this case?
Yes, the screw should be a replacement for the pin.
Dec 16, 2004 | 10:09 AM
Thread Starter
Pro
Joined: Jan 2004
Posts: 707
Likes: 0
From: IA
Dec 16, 2004 | 12:05 PM
Safety Car
Joined: Feb 2004
Posts: 4,208
Likes: 2
From: Rochester MN
CI 5-6-7-8 Veteran
St. Jude Donor '04-'05-'06-'07
NCM Ambassador
Dec 16, 2004 | 12:34 PM
Thread Starter
Pro
Joined: Jan 2004
Posts: 707
Likes: 0
From: IA
Good link but the pics don't display.
Last edited by SilverRoadster00; Dec 16, 2004 at 12:56 PM .
Dec 16, 2004 | 12:53 PM
Safety Car
Joined: Feb 2004
Posts: 4,208
Likes: 2
From: Rochester MN
CI 5-6-7-8 Veteran
St. Jude Donor '04-'05-'06-'07
NCM Ambassador
Quote:
Originally Posted by SilverRoadster00
God link but the pics don't display.
They didn't for me either but I thought the writeup may still be useful to ya.
Dec 16, 2004 | 12:56 PM
Thread Starter
Pro
Joined: Jan 2004
Posts: 707
Likes: 0
From: IA
I'm right along I35 between Ames and Des Moines, about 3-3.5 hours to the twin cities. the write up is good, I printed it out, thanks.
Dec 16, 2004 | 12:57 PM
Safety Car
Joined: Feb 2004
Posts: 4,208
Likes: 2
From: Rochester MN
CI 5-6-7-8 Veteran
St. Jude Donor '04-'05-'06-'07
NCM Ambassador
Quote:
Originally Posted by SilverRoadster00
I'm right along I35 between Ames and Des Moines, about 3-3.5 hours to the twin cities. the write up is good, I printed it out, thanks.
Let me know if you're ever up around Rochester - we'll be heading to CI-VI in May if you need a caravan to join up with
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
2027 Corvette vs The World: Every C8 vs Its Closest Competitor
Joe Kucinski
10 Most Common Corvette Problems of the Last 20 Years!
Joe Kucinski
5 MOST and 5 LEAST Popular Corvette Model Years in History!
Joe Kucinski
2027 Corvette Buyer's Guide: Everything You Need to Know!
Joe Kucinski
Dec 16, 2004 | 12:59 PM
Thread Starter
Pro
Joined: Jan 2004
Posts: 707
Likes: 0
From: IA
Will do, thanks for the invite.
Dec 16, 2004 | 01:56 PM
Joined: Oct 2002
Posts: 3,530
Likes: 8
From: Suffolk Virginia
Cruise-In IV Veteran
CI-4 Car Show Winner
Cruise-In VI Veteran
CI-6 Car Show Winner
Cruise-In VII Veteran
CI-7 Car Show Winner
St. Jude Donor '03-'04-'05-'06-'07-08-'09
NCM Ambassador
A little late but this may help -
http://www.gbvette.com/pedals.htm
Dec 16, 2004 | 02:01 PM
Thread Starter
Pro
Joined: Jan 2004
Posts: 707
Likes: 0
From: IA
Once again the forum comes through, thanks for the great info.
Dec 16, 2004 | 03:51 PM
Le Mans Master
Joined: Jan 2002
Posts: 5,071
Likes: 1,002
From: Fort Worth TX
St. Jude Donor '15
Quote:
Originally Posted by GB Vette
Thanks for the link. I have had the pedals for while but have not piut them on yet. Wil do it this weekend.