Blackwings?
Thread Starter
Safety Car
Joined: Jun 2004
Posts: 4,986
Likes: 393
From: Stoney Creek Ontario
Blackwings?
JUST GOT A BLACKWING FROM MY KIDS FOR CHRISTMAS. HAVEN'T INSTALLED IT YET, AS CAR TUCKED AWAY NICELY (JAMMED) IN GARAGE TILL A NICE DAY WHEN i CAN ROLL IT OUTSIDE INTO THE DRIVEWAY.
ANYONE HAVE ANY INSTALLATION TIPS/EXPERIENCE THEY'D SHARE WITH ME? THANKS FOR YOUR HELP
ANYONE HAVE ANY INSTALLATION TIPS/EXPERIENCE THEY'D SHARE WITH ME? THANKS FOR YOUR HELP
Race Director
Joined: Jul 2001
Posts: 13,190
Likes: 3
From: Johns Creek GA
Safety Car
Joined: Jun 2004
Posts: 4,971
Likes: 538
From: Witness Protection Program Somewhere, USA
2026 Restomod of the Year Finalist
Installation is pretty staight forward. The only place that you may run into a question is fitting the airbridge. I had to remove the two grommets that are on top of the radiator to get it to fit low enough.
No problem since it is held very firmly at the air filter.
Good liuck. This is a nice mod.
No problem since it is held very firmly at the air filter.
Good liuck. This is a nice mod.
Pro
Joined: Jul 2003
Posts: 528
Likes: 0
From: Yuma AZ
Originally Posted by boarddirector
Installation is pretty staight forward. The only place that you may run into a question is fitting the airbridge. I had to remove the two grommets that are on top of the radiator to get it to fit low enough.
No problem since it is held very firmly at the air filter.
Good liuck. This is a nice mod.
No problem since it is held very firmly at the air filter.
Good liuck. This is a nice mod.
You'll feel in SOP as well! You've got good kids!
Mac
Administrator
Joined: Mar 2001
Posts: 368,522
Likes: 24,823
From: In a parallel universe. Currently own 2014 Stingray Coupe.
C7 of the Year - Modified Finalist 2021
MO Events Coordinator
St. Jude Co-Organizer
St. Jude Donor '03 thru '26
NCM Sinkhole Donor
CI 5, 8 & 11 Veteran
It is really easy to install. Check out the link Thunder7 posted. Its the one I followed when installing mine.
Advanced
Joined: Nov 2004
Posts: 94
Likes: 0
Just follow the post from Thunder7. That's what I followed and it took about 45 minutes. Could have done it quicker, but I was really nervous and taking my time. Believe me, I am no mechanic. So if I can do it, you can too. Relax and go fot it!
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Night Owl for life
Joined: Nov 2003
Posts: 24,729
Likes: 4,564
From: Bugs Bunny should'a made a left turn here
Originally Posted by dankhts
JUST GOT A BLACKWING FROM MY KIDS FOR CHRISTMAS. HAVEN'T INSTALLED IT YET, AS CAR TUCKED AWAY NICELY (JAMMED) IN GARAGE TILL A NICE DAY WHEN i CAN ROLL IT OUTSIDE INTO THE DRIVEWAY.
ANYONE HAVE ANY INSTALLATION TIPS/EXPERIENCE THEY'D SHARE WITH ME? THANKS FOR YOUR HELP
ANYONE HAVE ANY INSTALLATION TIPS/EXPERIENCE THEY'D SHARE WITH ME? THANKS FOR YOUR HELP
Instructor
Joined: Nov 2002
Posts: 155
Likes: 0
From: Tampa Florida
One of the easiest installations. I did mine in less than an hour. You may want to look at dyno tuning the car after installation. I am having mine done this winter. I guess it runs lean without the tune up.
Enjoy
Enjoy
Team Owner
Joined: Sep 2002
Posts: 30,671
Likes: 4,621
From: Bonita Springs, Florida
Not too bad, just have to be patient with getting the airbridge to fit back on. Make sure everything is together and sealed properly when done.
Gets easier each time you do it. I think it took me only 15 minutes the 3rd time.
Gets easier each time you do it. I think it took me only 15 minutes the 3rd time.
Instructor
Joined: Oct 2004
Posts: 199
Likes: 1
Originally Posted by wally1992@mchsi.com
One of the easiest installations. I did mine in less than an hour. You may want to look at dyno tuning the car after installation. I am having mine done this winter. I guess it runs lean without the tune up.
Enjoy
Enjoy
for the kids.
Thread Starter
Safety Car
Joined: Jun 2004
Posts: 4,986
Likes: 393
From: Stoney Creek Ontario
I printed out Thunder7's info, and will tackle it over the next couple of days. The snow's supposed to melt, and it's going to be +9 C here this weekend.
Seems like an easy install.
No problem smoking the Mach 1, or the Mustang Bullet, both next door, but buddy across the street has a Viper - a little harder!
Seems like an easy install.
No problem smoking the Mach 1, or the Mustang Bullet, both next door, but buddy across the street has a Viper - a little harder!
Race Director
Joined: Jul 2001
Posts: 13,190
Likes: 3
From: Johns Creek GA
Originally Posted by dankhts
I printed out Thunder7's info, and will tackle it over the next couple of days. The snow's supposed to melt, and it's going to be +9 C here this weekend.
Seems like an easy install.
No problem smoking the Mach 1, or the Mustang Bullet, both next door, but buddy across the street has a Viper - a little harder!
Seems like an easy install.
No problem smoking the Mach 1, or the Mustang Bullet, both next door, but buddy across the street has a Viper - a little harder!
