Heads f/s(LSW ALLPRO w/Jesel Mohawks)
11-17-2008, 02:34 PM
#1
Drifting
Thread Starter
Member Since: Dec 2003
Location: Ca
Posts: 1,268
Likes: 0
Received 0 Likes
on
0 Posts
Heads f/s(LSW ALLPRO w/Jesel Mohawks)
These Heads were purchased from "West Coast Cylinder Head" for roughly $6700.00 complete with the Jesel Mohawks 1.8 complete.
The heads are essesntially new since the cleanup by WCCH and have the same extremely low hours on them as the Jesels.
These are off my failed 427 project.
Here are the specs:
-12 degree w/ 57.2cc Chambers
-Intake Runner:275cc
-Exhaust Runner:100cc
-Valve Size: Intake-2.180(Titanium) / Exhaust-1.600(Stainless)
-Surface Mill: .010"
-Valve Springs: Dual w/ Damper
-Diameter: 1.550"
-Seat Pressure:175lbs
-Open Pressure:460lbs
-Max Lift .690.
Priced to sell at $3450.00 here until Dec 7 when they go up and with the rest of my GOFAST parts to Pomona(LA) Swap Meet.
Send email addy for pics.PM or better yet, email response(onfireiii@verizon.net)
Local parties preferred.
Ed
The heads are essesntially new since the cleanup by WCCH and have the same extremely low hours on them as the Jesels.
These are off my failed 427 project.
Here are the specs:
-12 degree w/ 57.2cc Chambers
-Intake Runner:275cc
-Exhaust Runner:100cc
-Valve Size: Intake-2.180(Titanium) / Exhaust-1.600(Stainless)
-Surface Mill: .010"
-Valve Springs: Dual w/ Damper
-Diameter: 1.550"
-Seat Pressure:175lbs
-Open Pressure:460lbs
-Max Lift .690.
Priced to sell at $3450.00 here until Dec 7 when they go up and with the rest of my GOFAST parts to Pomona(LA) Swap Meet.
Send email addy for pics.PM or better yet, email response(onfireiii@verizon.net)
Local parties preferred.
Ed
Last edited by AMERICANMUSL; 12-01-2008 at 10:13 PM.
