GROUP BUY: VetteNuts C5 Insulation Kit $145 Shipped first 10
01-23-2014, 07:40 AM
#1
Supporting Vendor
Thread Starter
Member Since: May 2010
Location: Bell Buckle, TN
Posts: 6,811
Received 232 Likes
on
134 Posts
St. Jude Donor '11
GROUP BUY: VetteNuts C5 Insulation Kit $145 Shipped first 10
After many request from members we are going to do a GROUP BUY on the Insulation kits on for the first 10.
How to order. Send a paypal payment to marc@vettenuts.net or call the shop to pay by CC. Please choose from coupe, Vert or Z06/FRC when ordering, also manual or AT.
615-896-6100
VetteNuts has sold 1000's of these kits are are the same ones featured by Ecklers. We build these in house and this kit has been sold on the forum for years and has been put in all of my Vette's. There is a lot of customer feedback about these kits installed here on the forum.
How to order. Send a paypal payment to marc@vettenuts.net or call the shop to pay by CC. Please choose from coupe, Vert or Z06/FRC when ordering, also manual or AT.
615-896-6100
VetteNuts has sold 1000's of these kits are are the same ones featured by Ecklers. We build these in house and this kit has been sold on the forum for years and has been put in all of my Vette's. There is a lot of customer feedback about these kits installed here on the forum.
Retail $199
$145 shipped in the continental USA.
Add a roll of tape for $10!
Add a roll of tape for $10!
This sale is for 10 kits only so place your order now!
Please choose from coupe, Vert or Z06/FRC when ordering.
Please choose from coupe, Vert or Z06/FRC when ordering.
The C5 Pre-cut Insulation kit comes with everything you need to insulate and provide sound deadening in your Corvette, including Pre-cut pieces for your doors.
Other kits on the market provide a similar product, but do not provide pre-cut pieces for your doors and storage bins, which allow road noise to be present in your front and rear cabin. Our kit gives you everything you need to COMPLETELY insulate your C5 Corvette.
Our kit is a non-fiberglass, non-asphalt based product which weighs in at 3.5 lbs, for those who are weight conscious, it rejects 97% of the radiant heat, and has a manufacturer's rating of 19db of sound and road noise reduction!!! (please see the notes below on this... )
It is only 3/16" thick, so as not to interfere with proper mounting of your panels and seats, and all holes are pre-cut & all pieces are clearly labeled for your convenience.
It is our #1 goal to provide you ease of install, while making a HUGE improvement in your overall enjoyment of your Corvette!!!
Each kit is hand cut to our specifications, and guaranteed to make a dramatic difference in your C5!!!
Each kit comes with the following pieces:
It is only 3/16" thick, so as not to interfere with proper mounting of your panels and seats, and all holes are pre-cut & all pieces are clearly labeled for your convenience.
It is our #1 goal to provide you ease of install, while making a HUGE improvement in your overall enjoyment of your Corvette!!!
Each kit is hand cut to our specifications, and guaranteed to make a dramatic difference in your C5!!!
Each kit comes with the following pieces:
- Driver & Passenger front floorboard pieces, with holes cut for seat bolts and pedals.
- Driver & Passenger side tunnel pieces, cut around your e-brake.
- Full center console pieces, with holes for the center console bolts.
- Driver & Passenger side Door Panel pieces.
- Full Cargo area floor pieces.
- Full Side rear wheel well pieces.
- Full back wall and corner pieces.
- Full Center Well pre-cut pieces.
- Extra pieces for odds and ends coverage that you may need.
Say goodbye to over-heated center consoles, and noisy front cabins!! Our C5 kit is the perfect addition to your C5, and is recommended for every Corvette owner as the #1 modification for their Corvette!!!
Your Corvette will be cooler in the summer, a lot less noisy, and you will regain use of your center console once again.
A lot of research and development has gone into this kit, and we are proud to say that our kit is made to our demanding specs, in house, and cut off of our own templates.
Some have emailed and asked, so here is a picture of the material, as well as some specs on the material itself:
It has 5 layers, and though it is rated at a 19db drop in noise, my customers have tested it in the Vettes at 8-11 db. reduction. Here are some manufacturer specs on it:
polyethylene backing
closed-cell Polyethylene foam
polyethylene backing
Aluminum Foil
Your Corvette will be cooler in the summer, a lot less noisy, and you will regain use of your center console once again.
A lot of research and development has gone into this kit, and we are proud to say that our kit is made to our demanding specs, in house, and cut off of our own templates.
Some have emailed and asked, so here is a picture of the material, as well as some specs on the material itself:
It has 5 layers, and though it is rated at a 19db drop in noise, my customers have tested it in the Vettes at 8-11 db. reduction. Here are some manufacturer specs on it:
Characteristics | Value | Regulation
Cell Structure: Closed
Nominal Thickness: 5 mm (+ or - 0.5mm)
Steam Permeability: 0.033 gr/m2hkPa ASTM E-96
Noise Insulation: 19dBA IRAM 4063 at 50hz.
Flame Spread Index/Class: 25 or less/ "A" - Class 1 0 ASTM E-84
Smoke Index/Class: 450 or less/ "A" - Class 1 15 ASTM E-84
Cell Structure: Closed
Nominal Thickness: 5 mm (+ or - 0.5mm)
Steam Permeability: 0.033 gr/m2hkPa ASTM E-96
Noise Insulation: 19dBA IRAM 4063 at 50hz.
Flame Spread Index/Class: 25 or less/ "A" - Class 1 0 ASTM E-84
Smoke Index/Class: 450 or less/ "A" - Class 1 15 ASTM E-84
INSULATION LAYERS
Aluminum Foil polyethylene backing
closed-cell Polyethylene foam
polyethylene backing
Aluminum Foil
Pictures of the kit installed in a C5 vert are below.
Last edited by Marc@Vettenuts.net; 01-23-2014 at 07:45 AM.
