FS: F2 RHS 427 Build Part out
#1
Melting Slicks
Thread Starter
F2 RHS 427 Build Part out
I am in the process of removing parts but I am parting out a very nice F2 build that has a lot of very high end parts in it. All of these parts have mostly dyno pulls on them. The engine was hurt during the e85 tune and the part out started. Prices do not include shipping.
1. Dallas Performance F2 Procharger Cog Setup and Flip Drive- $8000
- Polished headunit and Sprag pulley installed. Innovators West dampner included and it does clear the steering rack. Front mount intercooler is custom and 6" thick, it has custom mounts that were made to mount it in front that work perfect. There is very little silicone hose in this kit, the piping was all custom made. Tial wastegate and Procharger Red Blowoff are included in price.
2. RPS BC3 Clutch- $2800
- Less than 1000 miles
3. ARH 2"x3" Headers and X pipe- $1000
- Calico coated and in great condition
4. Custom made muffler eliminators- $500
- Cutting of the rear well is required to make these work but they sound awesome and hold up to big power
5. ID1700 Injectors- $1600
6. Hogan Sheetmetal intake- $2400
- Intake will not clear a stock hood and cowl does have to be modified for this to work. It is plumbed with NX Express rails and those are included in the price
7. VIS Carbon Fiber Cowl Hood- $500- SOLD
- Has been cut to clear the Hogan intake
- Does have a few places cracked in it (pictured)
ID1700 Injectors
Crack on passenger side cowl
1. Dallas Performance F2 Procharger Cog Setup and Flip Drive- $8000
- Polished headunit and Sprag pulley installed. Innovators West dampner included and it does clear the steering rack. Front mount intercooler is custom and 6" thick, it has custom mounts that were made to mount it in front that work perfect. There is very little silicone hose in this kit, the piping was all custom made. Tial wastegate and Procharger Red Blowoff are included in price.
2. RPS BC3 Clutch- $2800
- Less than 1000 miles
3. ARH 2"x3" Headers and X pipe- $1000
- Calico coated and in great condition
4. Custom made muffler eliminators- $500
- Cutting of the rear well is required to make these work but they sound awesome and hold up to big power
5. ID1700 Injectors- $1600
6. Hogan Sheetmetal intake- $2400
- Intake will not clear a stock hood and cowl does have to be modified for this to work. It is plumbed with NX Express rails and those are included in the price
7. VIS Carbon Fiber Cowl Hood- $500- SOLD
- Has been cut to clear the Hogan intake
- Does have a few places cracked in it (pictured)
ID1700 Injectors
Crack on passenger side cowl
Last edited by 95BlueBomber; 07-13-2018 at 05:01 PM.
#5
Melting Slicks
Thread Starter