FS: ls1/ls6 Canton drag race oil pan and valley cover delete
#1
Instructor
Thread Starter
ls1/ls6 Canton drag race oil pan and valley cover delete
I have a Canton drag race oil pan that I pulled off my C5 FRC. I did not like the clearance issues when driving due to my car sitting so low and the way the oil filter mounts with my Kooks long tubes. I only had the oil pan on the car for maybe 500 miles and went back to a C5 batwing pan with improved racing baffles installed. I also had to cut the batwing pan "a lot" on the inside to make it work due to the stroke of my crank..another reason why I went with the Canton oil pan. This oil pan would work well with someone building a drag car or something that doesn't sit really low to the ground.
I don't have many photos from when the pan was installed in my car but will provide what I have. Canton also makes a remote oil filter adapter for this oil pan as well. You have to use Canton's stud bolt kit for this oil pan to bolt up. I reused the bolt kit on my batwing pan and will not be provided. The oil pan has some slight scrapes on the bottom from driving down my gravel driveway at 2mph (my car is also lowered a lot).
Description of oil pan: This steel drag race oil pan is designed for installing LS1/LS6 blocks into earlier chassis. Fits A, F, Y, & 1970’s X body cars. It has 6-1/2" deep, 9" long, 11-3/4" wide sump, for a 6-1/2 qt. capacity. Works with OEM GM#12558253 windage tray. This pan Requires our LS1 remote filter adapter or filter mount and our 13-275 pickup. Different sump configurations available as special order.
The Pan Features
* 6.5 qt System Capacity
* Clears 4.125" Stroke
* Drag Race Trap Door Baffle System
* Works with OEM GM# 12558253 windage tray
Recommended Accessories
13-275 - Pickup for 13-274 LS Oil Pan
21-870 - LS flywheel cover
22-302 - GM LS Oil Pan Stud Kit
22-630 - LS1 Remote Filter Adapter
22-632 - LS1 90 Degree Remote Filter Adapter
22-631 - LS1 Pan Mounted Spin-on Filter Mount
22-620 - Billet Aluminum Spin-on Filter Adapter
oil pan part# 13-274
pick up tube #13-275
fly wheel cover #21-870
billet filter mount (allows you to use factory oil filter) #22-631
I paid little over 700.00 dollars just for these four parts listed. That doesn't include the stud kit, gasket and windage tray.
I will sell all oil pan parts for 500.00 dollars plus shipping. I will not separate the oil pan parts or take low ball offers as the shop the built my engine said they will reuse it on another build and throw me some money.
I also have a valley cover delete for 20.00 bucks plus shipping.
fly wheel cover
oil filter mount
oil pan
pick up tube
scrape on oil pan
valley cover delete
changing the oil pan.
batwing pan
before motor installed in car
I don't have many photos from when the pan was installed in my car but will provide what I have. Canton also makes a remote oil filter adapter for this oil pan as well. You have to use Canton's stud bolt kit for this oil pan to bolt up. I reused the bolt kit on my batwing pan and will not be provided. The oil pan has some slight scrapes on the bottom from driving down my gravel driveway at 2mph (my car is also lowered a lot).
Description of oil pan: This steel drag race oil pan is designed for installing LS1/LS6 blocks into earlier chassis. Fits A, F, Y, & 1970’s X body cars. It has 6-1/2" deep, 9" long, 11-3/4" wide sump, for a 6-1/2 qt. capacity. Works with OEM GM#12558253 windage tray. This pan Requires our LS1 remote filter adapter or filter mount and our 13-275 pickup. Different sump configurations available as special order.
The Pan Features
* 6.5 qt System Capacity
* Clears 4.125" Stroke
* Drag Race Trap Door Baffle System
* Works with OEM GM# 12558253 windage tray
Recommended Accessories
13-275 - Pickup for 13-274 LS Oil Pan
21-870 - LS flywheel cover
22-302 - GM LS Oil Pan Stud Kit
22-630 - LS1 Remote Filter Adapter
22-632 - LS1 90 Degree Remote Filter Adapter
22-631 - LS1 Pan Mounted Spin-on Filter Mount
22-620 - Billet Aluminum Spin-on Filter Adapter
oil pan part# 13-274
pick up tube #13-275
fly wheel cover #21-870
billet filter mount (allows you to use factory oil filter) #22-631
I paid little over 700.00 dollars just for these four parts listed. That doesn't include the stud kit, gasket and windage tray.
I will sell all oil pan parts for 500.00 dollars plus shipping. I will not separate the oil pan parts or take low ball offers as the shop the built my engine said they will reuse it on another build and throw me some money.
I also have a valley cover delete for 20.00 bucks plus shipping.
fly wheel cover
oil filter mount
oil pan
pick up tube
scrape on oil pan
valley cover delete
changing the oil pan.
batwing pan
before motor installed in car