vinci programmer
Thread Starter
Burning Brakes
Joined: Nov 2002
Posts: 1,018
Likes: 52
From: Deltona Fl.
vinci programmer
Has anyone tried the new Vinci performance hand held programmer. If so
what did you think, and how flexible is it.It is similar in looks to a Superchip, PPlll ect. Thanks,
what did you think, and how flexible is it.It is similar in looks to a Superchip, PPlll ect. Thanks,
Thread Starter
Burning Brakes
Joined: Nov 2002
Posts: 1,018
Likes: 52
From: Deltona Fl.
Re: vinci programmer (stuart)
Just purchased the Vinci programmer and installed a custom program, it
lets you choose a lot more variables than does the Superchip. I replaced
a Superchips programmer with the Vince unit. To put it bluntly thier is no
comparison. The Vinci unit far out preforms the Superchip, it is as close
to an LS1 edit as you can get with a handheld. The feature I really like
beyond the performance gains, is that it is portable. Call and talk to
Roger he will answer all your questions, tell him Larry sent you.
lets you choose a lot more variables than does the Superchip. I replaced
a Superchips programmer with the Vince unit. To put it bluntly thier is no
comparison. The Vinci unit far out preforms the Superchip, it is as close
to an LS1 edit as you can get with a handheld. The feature I really like
beyond the performance gains, is that it is portable. Call and talk to
Roger he will answer all your questions, tell him Larry sent you.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
2027 Corvette vs The World: Every C8 vs Its Closest Competitor
Joe Kucinski
Racer
Joined: Feb 2004
Posts: 301
Likes: 0
From: Vista CA
Re: vinci programmer (GOOSE JR.)
Just got mine today. I have a 04 C5 six speed , Vararam & Coursa cat back other than that, all stock. Looking for advice on enrichment and timming. Did the hpstock cam tune and 190 fan. anyone play around with setting?
Pro
Joined: May 2004
Posts: 744
Likes: 0
From: St. Peters MO.
Re: vinci programmer (rarfinacial)
After installing the programmer both big end power and torque increased but I had a small amount of black on inside of both tailpipes. I went to the fuel curve adjustment pulled out 5% and fixed this problem. This Vinci programmer was able to tune my car with a cam, headers, blackwing, roller rockers,T.B. bypass, small crank pulley, carbon airbridge and a 170 stat with fan controller. The programmer has a mode to adjust timing but I haven't used it yet.
Drifting
Joined: Jun 2004
Posts: 1,887
Likes: 2
From: Havin' fun in Frederick, MD!!!
St. Jude Donor '05 '09
Re: vinci programmer (GOOSE JR.)
I've googled the Vinci Programmer but can't seem to find a thing. Where can I get the details online?
Thanks,
Tom
Ok, found it. Thanks anyway.
[Modified by lemansbleu2004, 1:56 AM 7/3/2004]
Thanks,
Tom
Ok, found it. Thanks anyway.
[Modified by lemansbleu2004, 1:56 AM 7/3/2004]
Thread Starter
Burning Brakes
Joined: Nov 2002
Posts: 1,018
Likes: 52
From: Deltona Fl.
Melting Slicks
Joined: Jul 2004
Posts: 3,092
Likes: 120
From: orlando florida
St. Jude Donor '15
http://www.vincihighperformance.com/...FO%20PAGE.HTML
track results from july 18th. been doing some R&D with them in getting this tuner perfected.
all stock + cutout open
60ft - 2.073
1/8 - 8.833 @ 82.55
1/4 - 13.636 @ 101.58
above + performance/stock cam program,+10% timing, shift firmness, shift enhancement
60ft - 2.041
1/8 - 8.697 @ 83.51
1/4 - 13.431 @ 102.90
i tried others like the stock cam/supercharged and the CAM #1 just for giggles. i gained a .1et/.5mph over stock from the CAM #1. for the supercharged one .05et/.3mph. remember the only thing i have added are the SLP airlid and cutout.
here's a tutorial i made up for vinci http://www.stealthram.com/vhptuner.htm
track results from july 18th. been doing some R&D with them in getting this tuner perfected.
all stock + cutout open
60ft - 2.073
1/8 - 8.833 @ 82.55
1/4 - 13.636 @ 101.58
above + performance/stock cam program,+10% timing, shift firmness, shift enhancement
60ft - 2.041
1/8 - 8.697 @ 83.51
1/4 - 13.431 @ 102.90
i tried others like the stock cam/supercharged and the CAM #1 just for giggles. i gained a .1et/.5mph over stock from the CAM #1. for the supercharged one .05et/.3mph. remember the only thing i have added are the SLP airlid and cutout.
here's a tutorial i made up for vinci http://www.stealthram.com/vhptuner.htm
Melting Slicks
Joined: Jul 2004
Posts: 3,092
Likes: 120
From: orlando florida
St. Jude Donor '15
VHP is having a hurricane sale on their tuners. was $459.00. now $419.00. PLUS you get a $20.00 mail in rebate on top of that!!! http://www.vincihighperformance.com/...LE%20PAGE.HTML
