Window Valet question
Racer
Joined: Nov 1999
Posts: 378
Likes: 0
From: C1 C2 C3 C4 C5 Iowa
Window Valet
Good question - I just sent an e-mail to their support people and asked this exact question - This could really expand their market if it works -
When/if I get a response from them, I'll post the answer - Unless, of course, someone out there is brave enough to try the one from their Corvette -
When/if I get a response from them, I'll post the answer - Unless, of course, someone out there is brave enough to try the one from their Corvette -
Instructor
Joined: Dec 2004
Posts: 105
Likes: 1
From: Westminster MD
I have been curious about this also, but I can't imagine it would work. To set up the Window Valet, you need to use the DIC buttons. So you'd be out of luck on a car w/o DIC buttons.
Last edited by 04c5ragtop; Mar 21, 2005 at 07:55 PM.
Racer
Joined: Nov 1999
Posts: 378
Likes: 0
From: C1 C2 C3 C4 C5 Iowa
Answer back from Top Down
Here is the note I received from Top Down -
Hi,
Unfortunately, the Window Valet will only work with the C5, however, we do have others in the works and suspect that we'll be able to support vehicles such as the newer Sierras in the future. Should we contact you again when new products become available?
Thank you so much for your interest,
-Michael Fuller, President
Top Down Technologies, Inc.
Hi,
Unfortunately, the Window Valet will only work with the C5, however, we do have others in the works and suspect that we'll be able to support vehicles such as the newer Sierras in the future. Should we contact you again when new products become available?
Thank you so much for your interest,
-Michael Fuller, President
Top Down Technologies, Inc.
