Radar Detector




http://valentine1.com/

It is a little big though!
The Best of Corvette for Corvette Enthusiasts
To add a bit of value to this thread rather than just an endorsement, I'll share a quick install note. I decided to try and fab my own cable to hook to the auto-dim mirror myself before shelling out some bucks to buy one off the net.
I found a black phone cord, measured and cut it to the length I wanted and crimped on some pins I extracted from a discarded PCB connector I had. From there it was just a matter of unplugging the mirror connector, shoving the pins into the appropriate locations on the back of the connector and plugging it into the mirror anf the phone jack into the V1.
The instructions elsewhere said to use the orange and brown wires but these both looked identical. Anyway, it worked.
I cut the cord as short as I could so there was no dangle or excess.
You can see it's a straight shot to the mirror. I can always make another, longer cord if I decide to move the V1.
The best kind of install - a 5 minute one.




Front and rear radar with laser diffusers here.
If you look at my homepage you can see my leds under the radio and the 2 front diffusers in the front screens.
Are you sure you have the volume turned up on your x50? The reason I ask is mine screams at me like a banshee when it picks up radar. If yours isn't it is either broken or the volume is turned down.














