crank pinning tool
Burning Brakes
Joined: Feb 2001
Posts: 892
Likes: 1
From: Houston Texas
I could let you borrow mine just as long as i get it back. I dont care about the drill bit but I definitely want the fixture back. Send me a deposit via paypal for the fixture and to cover shipping costs. After I get it back I will credit you back the money via paypal less shipping costs. Assuming you have a paypal account or have another idea.
You will need 1 or 2 steel pins that are 1/4" X 3/4" long. Drill the hole .800" deep. One hole is more than adequate but if you want to do the perfect balance thing, then spin the fixture half way around and drill another hole.
If you want to do this then send me an email with all your information and when you will need it and we can go from there.
You will need 1 or 2 steel pins that are 1/4" X 3/4" long. Drill the hole .800" deep. One hole is more than adequate but if you want to do the perfect balance thing, then spin the fixture half way around and drill another hole.
If you want to do this then send me an email with all your information and when you will need it and we can go from there.
