Dtc 1217
Thread Starter
Pro
Joined: Nov 2004
Posts: 729
Likes: 18
From: Oxford Pa
St. Jude Donor '05-'10-'12, '15
Dtc 1217
My y2k mn6 vert in the middle of a nice ride Sunday started showing the service the traction control, service ABS and service active handling. The current DTC is a 1217 "BPMV (Brake pressure modulating valve) pump motor relay contact open". My question is this. Is this relay a integral piece of this BPMV or can I buy this relay separately and replace it. This is when I should have spent the $150 for the service manuals.
PS. There are two more codes concerning the BPMV which are ok.
Thank you all in advance
Noe
PS. There are two more codes concerning the BPMV which are ok.
Thank you all in advance
Noe
Le Mans Master
Joined: Jul 2002
Posts: 7,370
Likes: 8
From: Slave to the evil empire
Cruise-In V Veteran
St. Jude Donor '04
The BPMV "brake pressure modulating valve" is part of the EBCM "electronic brake control module" and the BPMV can be replaced seperately from the EBCM but the relay contact is internal to the unit and must be replaced with it.
Either way you need to get a good service manual to describe the process, heres a set for $115: Service manual
Either way you need to get a good service manual to describe the process, heres a set for $115: Service manual
