fog light hsg
Thread Starter
Intermediate
Joined: Apr 2005
Posts: 43
Likes: 0
From: Yorba Linda CA
fog light hsg
Has anyone cut open the fog light housing to allow more air to enter the engine compartment? If so, pics please? Also, other than the potential for more dirt inside the engine bay, are there any disadvantages?
Safety Car
Joined: Oct 2000
Posts: 4,949
Likes: 10
From: Monticello MN
Originally Posted by caster5303
Has anyone cut open the fog light housing to allow more air to enter the engine compartment? If so, pics please? Also, other than the potential for more dirt inside the engine bay, are there any disadvantages?
Do a search on "fog light". There's been several threads on this subject. Of course, whether the search function will work, or not, is a crap shoot.
Ed
Racer
Joined: Dec 2004
Posts: 405
Likes: 0
From: Virginia Beach Virginia
Originally Posted by caster5303
Has anyone cut open the fog light housing to allow more air to enter the engine compartment? If so, pics please? Also, other than the potential for more dirt inside the engine bay, are there any disadvantages?
I used a keyhole saw and cut a rectangular piece (approx. 1.5" X 4") from each fog light shroud. I also installed the hood seal and Z06 screens and did the stock air box mod...no aftermarket intake yet. My engine compartment stays clean...of course I wash, wax and vacuum it
