Trans cooler?
Thread Starter
Cruising
Joined: Feb 2005
Posts: 12
Likes: 0
From: South Florida
Trans cooler?
I'm going to be adding a trans cooler in the near future to my 02 a4 corvette. Does anyone know what size the cooler line fittings are that go into the radiator and which pipe is which for flow back to the trans? 
CelticRebel
CelticRebel
Thread Starter
Cruising
Joined: Feb 2005
Posts: 12
Likes: 0
From: South Florida
What kind of means does the kit use for attaching the new lines to rad and cooler line itself? I like using aqp hose and fittings that are threaded together instead of sliped over and hose clamped. The bm racing models have a 1/2 npt so I won't have any trouble plumbing into them, it's the other sizes I need to find out. CelticRebel
CelticRebel
Instructor
Joined: Mar 2005
Posts: 147
Likes: 0
From: Lusby MD
B & M uses fittings that fit/screw into the rad and oil line but use hose and clamps from there on. I don't know what size they were but they were perfect for the rad and oil line. Sorry, I wish I could help.
Pro
Joined: May 2001
Posts: 572
Likes: 20
From: Pittsburgh, PA - UCCC 11 Second Club
Originally Posted by CelticRebel
What kind of means does the kit use for attaching the new lines to rad and cooler line itself? I like using aqp hose and fittings that are threaded together instead of sliped over and hose clamped. The bm racing models have a 1/2 npt so I won't have any trouble plumbing into them, it's the other sizes I need to find out. CelticRebel
CelticRebel 
