****help****
Thread Starter
Melting Slicks
Joined: Mar 2004
Posts: 3,002
Likes: 0
From: Surrey BC
****help****lowering on stock bolts
hey everyone, im lowering my car right now (on stock bolts) i already have the back done...but im confused with the front....how many threads are supposed to be showing once the front is completed???
thanks in advance
thanks in advance
Last edited by BickyDhadwal; Jun 26, 2005 at 03:58 PM.
Drifting
Joined: Jun 2004
Posts: 1,887
Likes: 2
From: Havin' fun in Frederick, MD!!!
St. Jude Donor '05 '09
The fronts you unscrew. That is you are screwing the spacer pieces up through the spring. Screw them all the way up and then drive it to see how low it is. Mine are screwed up all the way and it lowered it about 1/2 to 3/4 inch.
Make sure you take the load off of those spacers becaause it will tear the drive slot up if you don't.
Make sure you take the load off of those spacers becaause it will tear the drive slot up if you don't.
