OBDII Drive Cycle problem
Thread Starter
Safety Car
Joined: Sep 2001
Posts: 4,267
Likes: 6
From: Cumming Ga
OBDII Drive Cycle problem
I had a bad rear 02 sensor. Problem is fixed. I went through what I thought was the drive cycle and took it to the emissions place two days ago. According to him, still missing the 02 heater and catalyst.
I drove the car about 100 miles yesterday. Then this am I did a cold start again. Checking the system with auto tap:
Catalyst monitoring status: incomplete
Evap monitoring status: incomplete
O2 heater status: incomplete
Fuel system status: complete
Misfire monitoring status: complete
WhaT do I need to do to get these tests complete? I really need to get my emissions today so I can get a sticker. Is it possible that autotap is not working for these functions??
thanks,
Tim
I drove the car about 100 miles yesterday. Then this am I did a cold start again. Checking the system with auto tap:
Catalyst monitoring status: incomplete
Evap monitoring status: incomplete
O2 heater status: incomplete
Fuel system status: complete
Misfire monitoring status: complete
WhaT do I need to do to get these tests complete? I really need to get my emissions today so I can get a sticker. Is it possible that autotap is not working for these functions??
thanks,
Tim
