Ordered Heads and Cam Today!!!
Thread Starter
Racer
Joined: Feb 2005
Posts: 350
Likes: 0
From: Metro ATL GA
Ordered Heads and Cam Today!!!
Ordered PRC 2.5's and Comp 224-230 / 581-588 114lsa Package #2 from Jason at Texas Speed and Performance. Ordered center-bolt valve covers, coil brackets and new PCV hose set-up from local dealership. Does anyone have any experience ( or opinions) with this combo? My 98 mn6 coupe has Dyno'd at 327.6 rwhp and 343 rwtq with Dynatechs, Borlas, Blackwing and Tune. I am hoping for 400 rwhp. Now, if anyone wants to come to Macon GA and assist me (Heat Index 111 today) I would be eternally grateful.
Regards,
Jay Lee
Regards,
Jay Lee
Safety Car
Joined: May 2004
Posts: 4,811
Likes: 2
From: Simpsonville SC
congrats on the purchase, hopefully soon Ill be ordering me some. Yea Im not far away from ya here in Simpsonville, SC. Would help and want to learn but New Baby, and wife so doubt I could, but good luck anyway and post some numbers when you get everything done! Good Luck! 
Racer
Joined: Jan 2005
Posts: 444
Likes: 0
From: Easley S.C.
Cowpunk, I hope you have the know how to install that cam, Cause I just got a quote of $1200 to install one! Happa, we live really close to each other, remember to wave and good luck with the new BABY!
Thread Starter
Racer
Joined: Feb 2005
Posts: 350
Likes: 0
From: Metro ATL GA
Originally Posted by toplessvettetherapy
Cowpunk, I hope you have the know how to install that cam, Cause I just got a quote of $1200 to install one! Happa, we live really close to each other, remember to wave and good luck with the new BABY!
Best,
Jay Lee
Le Mans Master
Joined: Feb 2002
Posts: 5,970
Likes: 20
From: San Marcos Texas
Check out my dyno, You should hit 440RWHP with that setup...
http://forums.corvetteforum.com/show...post1551500286
http://forums.corvetteforum.com/show...post1551500286
Le Mans Master
Joined: Dec 2002
Posts: 7,981
Likes: 37
From: Piedmont, SC Currently Own: 99 Nassau blue FRC. Previously Owned: 84,95,98 Indy Pace,01 Z06
Originally Posted by happa
Thanks man, I will be sure to wave. I dont know anyone on the forums that are close to me, be cool to meet up and shoot the breeze with some fellow vette owners!
Hey, I think I have seen you around a couple times. If you are the same guy, you go by my house quite often.
The head and cam idea sounds awesome. Soon, I will be there also. Let us know what numbers it puts down.
-Jason
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
Melting Slicks
Joined: Oct 2002
Posts: 2,200
Likes: 0
Originally Posted by cowpunk
Ordered PRC 2.5's and Comp 224-230 / 581-588 114lsa Package #2 from Jason at Texas Speed and Performance. Ordered center-bolt valve covers, coil brackets and new PCV hose set-up from local dealership. Does anyone have any experience ( or opinions) with this combo? My 98 mn6 coupe has Dyno'd at 327.6 rwhp and 343 rwtq with Dynatechs, Borlas, Blackwing and Tune. I am hoping for 400 rwhp. Now, if anyone wants to come to Macon GA and assist me (Heat Index 111 today) I would be eternally grateful.
Regards,
Jay Lee
Regards,
Jay Lee
What compression will the heads put you at???
Thread Starter
Racer
Joined: Feb 2005
Posts: 350
Likes: 0
From: Metro ATL GA
Originally Posted by SideStep
You will be over 410rwhp, but not sure how much more over that. Looks like you are missing a few mods; LS6intake, ported TB, UD pulley.
What compression will the heads put you at???
What compression will the heads put you at???
Going to pass on ported TB. Still mulling over intake and UD Pulley. (I am definately not sold on the durability of some of these UD pulleys.)
Best,
Jay
