Help with an electrical problem.
Thread Starter
Racer
Joined: Oct 2002
Posts: 449
Likes: 2
From: Fayetteville, PA
Help with an electrical problem.
My passanger seat bolsters don't deflate 
. I moved the wires to see if something is pinched, not 
. Can someome tell me the wire colors to jump so that I can make sure the switch is bad 
.
1997 C5
Black on Black
THanks in advance
. I moved the wires to see if something is pinched, not . Can someome tell me the wire colors to jump so that I can make sure the switch is bad .1997 C5
Black on Black
THanks in advance
Race Director
Joined: Oct 2004
Posts: 10,719
Likes: 18
Bolsters
Hey, if the things inflate, that means the pump is working, but not letting the air out means the bleed valve is not opening. The best way to fix it is to pull the seat out and find the pin that supplies power to the pump/valve module through the control box under the seat. Supply battery power to it and eliminate the valve as trouble first then backtrack to the power source coming from the control box then back to the switch on the side of the seat, which is more than likely the problem since it gets a lot of abuse from getting in and out of the car.
