Re-Timing HVAC Actuator
Thread Starter
Drifting
Joined: May 2003
Posts: 1,328
Likes: 3
From: Las Vegas Nevada
Re-Timing HVAC Actuator
I have seen this included in several posts:
If this has already been done, a reset/re-time the actuators internal feedback sensor to lag slightly behind the actual position can be performed. Open the actuator case and reset the output gear and sensor gear by only 1 gear tooth. This will allow a feedback of 4 counts when performing learn.
Has anyone done this?
Which is the sensor gear?
Clockwise or Counter-clockwise??
For both?
Any help appreciated
If this has already been done, a reset/re-time the actuators internal feedback sensor to lag slightly behind the actual position can be performed. Open the actuator case and reset the output gear and sensor gear by only 1 gear tooth. This will allow a feedback of 4 counts when performing learn.
Has anyone done this?
Which is the sensor gear?
Clockwise or Counter-clockwise??
For both?
Any help appreciated
