The Weakest Link
Thread Starter
Drifting
Joined: Apr 2000
Posts: 1,442
Likes: 209
From: Lake Mary Florida
The Weakest Link
See signature for mods. I have been drag racing on the average two times a month. What is the weakest (driveline) link? If I am going to break something, what will it most likely be? 
Rear (Factory assembled 3.42 non-Z06)
Output shafts (stock)
Trans (stock with aftermarket T/C per signature)
Other
Rear (Factory assembled 3.42 non-Z06)
Output shafts (stock)
Trans (stock with aftermarket T/C per signature)
Other
Team Owner
Joined: Jul 2004
Posts: 24,652
Likes: 298
From: NJ
St. Jude Donor '05-'08
Well I know for the MN6 guys we all try to get the hardened output shaft and the DTE brace.
From what I have heard from others the BFGs have a good chance of grapping and breaking things because they don't flex that much. I am running the same tires, but have been thinking about switching over to the MT ETs they flex a ton...
From what I have heard from others the BFGs have a good chance of grapping and breaking things because they don't flex that much. I am running the same tires, but have been thinking about switching over to the MT ETs they flex a ton...
Last edited by Wicked Weasel; Sep 19, 2005 at 06:15 PM.
