Bill Curlee
Thread Starter
Melting Slicks
Joined: Feb 2002
Posts: 2,613
Likes: 0
From: Winston Salem NC
Bill Curlee
http://forums.corvetteforum.com/show...218&forum_id=1
Bill,
I had a U1160 code and the doors locks and windows did not work from the drivers side. I did a search and found your "tug on the cable" fix. It's at the link above. The first time I tried it didn't help. While I had the door open I tried the controls and they worked. But only with the door open. So with renewed commitment
I tugged again and it now works with the door closed.
Thanks, I would never have tried this fix. Your a great help on this Forum.
Joe
Bill,
I had a U1160 code and the doors locks and windows did not work from the drivers side. I did a search and found your "tug on the cable" fix. It's at the link above. The first time I tried it didn't help. While I had the door open I tried the controls and they worked. But only with the door open. So with renewed commitment
I tugged again and it now works with the door closed.Thanks, I would never have tried this fix. Your a great help on this Forum.
Joe
