DIC Code P0430??
Thread Starter
Instructor
Joined: Feb 2005
Posts: 228
Likes: 3
From: Va Beach VA
DIC Code P0430??
I got this code after finishing installing my headers, about 20 min and 30 miles after I left the shop. I think it is "TWC System low efficency Bank 2-A" Any idea what this is? I also got a whole bunch of right and left door control module codes (B2282,86 B2285 B2287) Could this be a ground problem?? Car runs and sounds great, even with check engine light on. Any help will be great.
thanx,
thanx,
Former Vendor
Joined: Feb 2004
Posts: 10,876
Likes: 8
From: Las Vegas NV
St. Jude Donor '06 & '12
Originally Posted by connecticut
standard deal w/ headers; you can have it tuned out
If I'm not mistaken thats for the air pump on start up. Mine does it every couple of months. No Biggie
Race Director
Joined: Oct 2002
Posts: 16,477
Likes: 26
From: Gone
CI 6-7-8-9-10 Veteran
St. Jude Donor '03
Originally Posted by AMERICAN_HP
If I'm not mistaken thats for the air pump on start up. Mine does it every couple of months. No BiggieTWC stands for Three Way Catalyst, and it, (along with P0420) are codes that let you know your catalytic converters are inefficient or not working.
These two codes are thrown when the PCM doesn't detect enough of a difference in readings between the front 02 sensors, and rear 02 sensors.
Aftermarket high-flow cats seem to be good at causing these codes, and the only way to really cure this would be to edit the rear 02 sensors out of the PCM program, or use 02 sims.
Race Director
Joined: Aug 1999
Posts: 16,935
Likes: 26
From: Lackey, my own dragstrip VA.
Virginia Events Coordinator
Cruise-In IV Veteran
Cruise-In V Veteran
Cruise-In VI Veteran
Cruise-In VII Veteran
NCM Ambassador
Originally Posted by C5COM67
Thanks alot for your help 
I plan on getting it tuned at CAM soon, so I will let them edit those rears out.
Thanks again
I plan on getting it tuned at CAM soon, so I will let them edit those rears out. Thanks again
We have this issue once in a while in the 00' coupe.
We just blow the code away and keep on getting it!
Thread Starter
Instructor
Joined: Feb 2005
Posts: 228
Likes: 3
From: Va Beach VA
Yep, thats the plan, as soon as DART heads are available from PrecisionPorting in FL, getting that and tha cam done. (231/237 591/598 112)
Been thinkin about our conversation at the car show, depending on what Jeff says, I will be stickin with stock lifters and rockers. dont plan on beatin on her too hard but plans have been known to change. 
Been thinkin about our conversation at the car show, depending on what Jeff says, I will be stickin with stock lifters and rockers. dont plan on beatin on her too hard
but plans have been known to change.
Race Director
Joined: Aug 1999
Posts: 16,935
Likes: 26
From: Lackey, my own dragstrip VA.
Virginia Events Coordinator
Cruise-In IV Veteran
Cruise-In V Veteran
Cruise-In VI Veteran
Cruise-In VII Veteran
NCM Ambassador
Originally Posted by C5COM67
I will be stickin with stock lifters and rockers. dont plan on beatin on her too hard but plans have been known to change.
but plans have been known to change. Taking the valve covers off once in a while is a good thing any way
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
5 Best & 5 Worst Corvette Daily Drivers
Joe Kucinski
The Headlights of Every Corvette Generation Explained
Joe Kucinski
5 Best & 5 Most Overrated Corvette Track Packages of All Time!
Joe Kucinski
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
