doesnt sound like a broken gear, might be just a fuse...
headlight trouble (Please help)
Thread Starter
Instructor
Joined: Nov 2005
Posts: 188
Likes: 0
From: DFW TX
headlight trouble (Please help)
I recently became a corvette owner again when I purchased my 99 jet black coupe. I am also new to this corvette forum, Iam from the Dallas,TX area. Anyways, my wife was driving the vette and the headlight went out, when she put the lights down they have not come back up and healight will not come on. I have a twist style light switch, I have changed the bulbs and they still dont work)come on or pop up). If anyone has any ideas how to fix this please let me know! Im glad to be a part of the corvette forum again!
Burning Brakes
Joined: Oct 2004
Posts: 801
Likes: 17
From: Middletown Delaware
I have trouble with mine every now and then. I will work the switch about 20 times and they will start working. They will work fine entill car sits again for a long time. Also check fuse,Your owners manual will show which one. I also have a 99FRC.
Thread Starter
Instructor
Joined: Nov 2005
Posts: 188
Likes: 0
From: DFW TX
I have checked all the fuses and all are still good! I have looked at the maxi breaker fuse under the kickpanel but dont know how to check it being it is one of those metal kinds. 20amp i believe. What did u do to the switch when u worked with it.
Safety Car
Joined: Nov 2000
Posts: 4,419
Likes: 6
From: Arroyo Grande CA
Will the Hi-Beams come on, with the lights down and no key in ignition, when you pull the lightswitch stalk to Flash-To-Pass?
If so, I've had a similar problem before. Dealer, under warranty, replaced the BCM.
If so, I've had a similar problem before. Dealer, under warranty, replaced the BCM.
Intermediate
Joined: Jan 2006
Posts: 36
Likes: 0
Originally Posted by 2KFRC5
Will the Hi-Beams come on, with the lights down and no key in ignition, when you pull the lightswitch stalk to Flash-To-Pass?
If so, I've had a similar problem before. Dealer, under warranty, replaced the BCM.
If so, I've had a similar problem before. Dealer, under warranty, replaced the BCM.
Can anyone provide me with any headlight wiring schematics so I can test the circuits prior to letting the dealer abuse me with a full diagnosis, a new bcm and a reprogramming of it.
Or... can anyone else confirm that a bcm is required in this circumstance?
Any shops/people in the new england area who can reflash the bcm or flash a used one if I can find one?
Any help is appreciated
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Pro
Joined: Nov 2003
Posts: 682
Likes: 8
From: Alexandria VA
Originally Posted by drivenC5
DickieC... just to confirm, the same symptoms of lights not going up or on but the pass to flash working?
Intermediate
Joined: Jan 2006
Posts: 36
Likes: 0
Originally Posted by DickieC.99
Yup. My experience was probably a total fluke but you might as well give it a shot. This is what happened to me a couple years back - came out to the car, it starts right up, I pull out of garage and turn on lights, they don't come up, with the car running I get out to take a look and the lights are ON (just didn't come up). "Thats weird" - so I turn car off and turn car on again, this time lights don't come up AND they are OFF, I try to flash the brights and I can see that they are working. "WTF" - at this point I pulled back in the garage and slept on it. Remember, the car turns over right away and runs fine. So it couldn't be a battery/charge problem, I thought, must be something big. But after posting on here someone told me to check the battery. Sure enough, the positive cable was just BARELY loose. Tightened it, started her up, and all has been well since. I know, doesn't make sense, but that was my problem. Hope this works for you too.
I appreciate the help.
