A & A Vacuum pumps...need pics
Thread Starter
Le Mans Master
Joined: Oct 2001
Posts: 5,577
Likes: 3
From: Southern Maryland Maryland
A & A Vacuum pumps...need pics
Does anyone have any pics of the pumps installed? I am trying to figure out where I need to weld some fittings to my current setup.
Phil
Phil
Instructor
Joined: Mar 1999
Posts: 231
Likes: 1
From: Ft Lauderdale FL
Thread Starter
Le Mans Master
Joined: Oct 2001
Posts: 5,577
Likes: 3
From: Southern Maryland Maryland
Thanks for the pics. I don't think that peak numbers do anything for this kit. If you look at the two dyno graphs you can spot a few things that are pretty interesting...
1) appears your up by 20 ft/lbs @ 4000
2) The top side appears to be "flat" meaning that there is more hp on the table
- Before peaked @ 6000
- After peaked @ 5600
- Before appears to be 450-455rwhp @ 5500
- After appears to be 480rwhp @ 5500
Maybe andy could pull up the dyno graph and print the numerical data comparing the 2 systems.
1) appears your up by 20 ft/lbs @ 4000
2) The top side appears to be "flat" meaning that there is more hp on the table
- Before peaked @ 6000
- After peaked @ 5600
- Before appears to be 450-455rwhp @ 5500
- After appears to be 480rwhp @ 5500
Maybe andy could pull up the dyno graph and print the numerical data comparing the 2 systems.
