ET Performance 225cc Hyd. Roller Pushrod Mockup
Thread Starter
Le Mans Master
Joined: Oct 2001
Posts: 5,577
Likes: 3
From: Southern Maryland Maryland
ET Performance 225cc Hyd. Roller Pushrod Mockup
Tonight I mocked up the pushrod length on the 225s in our hyd. roller setup. I love the fact that it came out perfect.
Adjustable pushrod lengths:
Base 5.520
Top 2.570
Preload 0.010
Total:8.100
Adjustable pushrod lengths:
Base 5.520
Top 2.570
Preload 0.010
Total:8.100
Thread Starter
Le Mans Master
Joined: Oct 2001
Posts: 5,577
Likes: 3
From: Southern Maryland Maryland
Engine Setup:
LS6 Block
LS1/6 Crank Micro polished and balanced
Scat Rods
Mahle -4cc pistons
Coated, bearings springs, ect
ETP 225cc hyd roller 11.6:1 CR
Our Custom Cam >236 & >.600 & <112 LSA
8.100 Pushrods
Ported 90mm intake
90mm TB
4" TB tube
Automatic C5
LS6 Block
LS1/6 Crank Micro polished and balanced
Scat Rods
Mahle -4cc pistons
Coated, bearings springs, ect
ETP 225cc hyd roller 11.6:1 CR
Our Custom Cam >236 & >.600 & <112 LSA
8.100 Pushrods
Ported 90mm intake
90mm TB
4" TB tube
Automatic C5
Former Vendor
Joined: May 2005
Posts: 3,749
Likes: 4
From: Valencia Ca
Design Sheets
Originally Posted by Phil97SVT
If it was a 6 speed 500-530 rwhp.
Phil
Phil
Charlie
Phil's A4 Motor Sheet
