Momo Shift Knobs: How well do they fit?
Thread Starter
Burning Brakes
Joined: Feb 2001
Posts: 793
Likes: 2
From: Milwaukee & Long Beach WI & CA
Momo Shift *****: How well do they fit?
I thinking of getting a Momo shift **** for my manual with a Hurst shifter. How do these lock into place? Is there a jam nut or a set screw? Are the threads the right size? Anyone have any issues locking it down. I want to be sure the only rattling is from the Hurst 
Life Time NCM #2196
Joined: Sep 2004
Posts: 82,586
Likes: 1,698
From: Converse TX
Originally Posted by EHS
I have one (simple chrome ball) with three set screws (allenhead) around the collar. They fit well. No problems in five years. Stock shifter.
Same luck with mine and it has been on my Hurst shifter for the 3 years I have had my car with no problems 
Race Director
Joined: Oct 2002
Posts: 16,477
Likes: 26
From: Gone
CI 6-7-8-9-10 Veteran
St. Jude Donor '03
Momo's are universal, and come with various size rubber bushings that sliip over the shifter shaft (they don't thread on).
Grab the right sized bushing, fit it over the shaft, drop the trim cap and the **** on, tighten the 3 small set screws at the base of the ****, and screw on the lower trim cap.
I've had one on my car for 3 years, and no problems with it loosening or making noise.
Grab the right sized bushing, fit it over the shaft, drop the trim cap and the **** on, tighten the 3 small set screws at the base of the ****, and screw on the lower trim cap.
I've had one on my car for 3 years, and no problems with it loosening or making noise.
