Coil relocation for ET Heads??? Anyone?
Thread Starter
Burning Brakes
Joined: Nov 2004
Posts: 1,037
Likes: 0
From: Independence Missouri
St. Jude Donor '06
Coil relocation for ET Heads??? Anyone?
ET 215 heads w/ 1/2" spacer and on the driver side, because of the alternator, the stock coil paks don't fit. Has anyone developed a solution yet? Thanks in advance. 
Le Mans Master
Joined: Oct 2001
Posts: 5,577
Likes: 3
From: Southern Maryland Maryland
This is a tough one. On my car we had to use 1" spacers to clear the Jesel's and on an automatic I built we initally used .500" spacers. Using spacers will make clearance too tight for the coil packs. On the automatic we built, we gutted the stock covers but you got to be careful becuase with no baffles it spits alot of oil. I'll take pics of my coil pack relocation....
Phil
Phil
Thread Starter
Burning Brakes
Joined: Nov 2004
Posts: 1,037
Likes: 0
From: Independence Missouri
St. Jude Donor '06
Thanks Phil. Using the .500 spacers works great with stock rockers. I just didn't want to gut a new powder coated set. The passenger is fine and the wires fit, its just with the tall head there is absolutely no clearance between the valve cover and alternator.
