Need Help - Heated Seat Switch Install
Thread Starter
Melting Slicks
Joined: Feb 2002
Posts: 2,148
Likes: 1
From: GA
Need Help - Heated Seat Switch Install
Posted this in General and thought I might get a bit more input by duplicating it here.
Can anybody give me some feedback on the circuit board located under the traction control panel? Looked at previous post (gtoformula2) and e-mailed him but no response yet. My question is the effect of trimming the corner of this board to make room for seat switches. In the posted pics, it appears that some of the circuitry was also trimmed off. Is there any compromises in doing this (I have traction control with air bag indicator light only)... Will this effect either the traction conrol function or effect the airbag indicator light? I'm hoping that some of the printed circuit is actually for options I don't have...
Here is the orignal thread with picture of trimmed circuit board...
http://forums.corvetteforum.com/sho...#post1552854403
Can anybody give me some feedback on the circuit board located under the traction control panel? Looked at previous post (gtoformula2) and e-mailed him but no response yet. My question is the effect of trimming the corner of this board to make room for seat switches. In the posted pics, it appears that some of the circuitry was also trimmed off. Is there any compromises in doing this (I have traction control with air bag indicator light only)... Will this effect either the traction conrol function or effect the airbag indicator light? I'm hoping that some of the printed circuit is actually for options I don't have...
Here is the orignal thread with picture of trimmed circuit board...
http://forums.corvetteforum.com/sho...#post1552854403
Last edited by TOOGECKO; Mar 3, 2006 at 01:22 PM.
