LED's for the interior
Thread Starter
8th Gear
Joined: Jun 2005
Posts: 8
Likes: 0
From: Pflugerville Texas
LED's for the interior
I just replaced my interior door and center console lights with some blue 5mm LED's. I am real impressed. Its a unique and cheap upgrade. Anyone know how to replace the bulbs on the dash (i.e. trip, gauges, fuel) ? You have several different choices with bulb color. www.oznium.com. There is also a article in this months Corvette Enthusiast.
Thread Starter
8th Gear
Joined: Jun 2005
Posts: 8
Likes: 0
From: Pflugerville Texas
It is like 10 dollars with shipping and real easy. Just make sure you get the resistors with the lights. All you need then is a dremel and a soldering iron. It has been the easiest mod so far.
Instructor
Joined: Sep 2005
Posts: 171
Likes: 2
From: Parsippany NJ
Originally Posted by Max Merideth
I just replaced my interior door and center console lights with some blue 5mm LED's. I am real impressed. Its a unique and cheap upgrade. Anyone know how to replace the bulbs on the dash (i.e. trip, gauges, fuel) ? You have several different choices with bulb color. www.oznium.com. There is also a article in this months Corvette Enthusiast.
Burning Brakes
Joined: Mar 2003
Posts: 824
Likes: 5
From: Chicago Illinois
Originally Posted by Max Merideth
There is also a article in this months Corvette Enthusiast.
Carleton
Advanced
Joined: Mar 2003
Posts: 80
Likes: 0
From: San Diego CA
Originally Posted by SpdKilz
Yeah...I am a bit dismayed they would mention Oznium.com but not my site in that article. I'm not claiming I was the first person to do this modification, but from what the article shows it is somewhat clear to me they have at least heard/visited my site. Mainly for the fact no one KNEW Oznium.com until I began pushing the site on here because my friend runs it...also I have a tech tip on his site under the LED section showing how to do what was shown in the article. I just with they would have possibly given me props or something....
Carleton
Carleton
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Le Mans Master
Joined: Aug 2005
Posts: 7,201
Likes: 0
From: DP(oh you know where) IL
St. Jude Donor '06
DO you have to get a resistor for each LED. Also do I get the 3mm or 5mm? Thanks
just saw that i do need a resistor for each LED. Question now is, 3mm or 5mm?
just saw that i do need a resistor for each LED. Question now is, 3mm or 5mm?
