Quick Question on the HUD install...
Thread Starter
Racer
Joined: Mar 2006
Posts: 378
Likes: 0
From: McKinney Texas
Quick Question on the HUD install...
I have a quick question,
I'm on page 20 now getting ready to put the wires from the old conector to the new one. These are the 7 wires I just took out. I need to start with the Black,yellow,blue,green,red,white, and brown.
DO I go from left to right or right to left next to the green wire already in the black conector?
Thanks,
David
I'm on page 20 now getting ready to put the wires from the old conector to the new one. These are the 7 wires I just took out. I need to start with the Black,yellow,blue,green,red,white, and brown.
DO I go from left to right or right to left next to the green wire already in the black conector?
Thanks,
David
Burning Brakes
Joined: Jul 2004
Posts: 1,169
Likes: 71
From: MA
Check this thread out. It has a picture of the 11 pin harness. I think this is what you are asking about: http://forums.corvetteforum.com/show...um_id=1&arch=1
