Active Handling Question
Thread Starter
Advanced
Joined: Aug 2005
Posts: 62
Likes: 0
Need help Active Handling
The Tensioner craped out on me and left me stranded 5 miles from my house, could not find a rollback that would pick me up, so I got the four wheel drive and tow rope and pulled it home, taking it easy and only 5 turns, everything seemed to be fine... While I was waiting on the new tensioner to come in I disconnected the battery... Put the new Tensioner on, started it up and backed out of the drive, approached a stop sign, made a left turn brakes started grabbing active handling comes on... The car drives fine after this, reset the code but the red light stays (car icon) on... It will only do this when the car is shut off and then start up and drive, just as soon as I make a turn Left or Right it will do this... Any Ideas?
After this happend I disconnected the battery over night, next day same thing...
After this happend I disconnected the battery over night, next day same thing...
Last edited by VETTerman1; May 21, 2006 at 06:04 PM. Reason: added information
