o2 sensor code: Please help.
Thread Starter
Intermediate
Joined: Jun 2006
Posts: 35
Likes: 3
From: Atlanta Georgia
o2 sensor code: Please help.
Well i just put SLP headers on my 99 Hardtop and im having some o2 sensor codes all of a sudden. The code is saying bank 1 and 2 o2 sensor no activity. Sorry i do not have the code number. Before i take it somewhere i figured id ask. Do the headers cause the o2 sensors to burn out? The car runs fine and is much improved with the headers.
Melting Slicks
Joined: Oct 2002
Posts: 2,492
Likes: 0
From: Williamson New York
Your going to need those O2's when you go for a tune-which you'll need to do to get all the ponies out of those LT's- I had similar problem when I installed my DynaMaxx LT's You can leave the rear O2's disconnected but the fronts need to be there- I think you may have a bad connection or broken wire- and make sure you hook up front left to front left and right to right the rears are reversed Good
Luck
Luck
Thread Starter
Intermediate
Joined: Jun 2006
Posts: 35
Likes: 3
From: Atlanta Georgia
if i put simulators where the rear o2's go will the engine light stay on? where can i find the cheapest ones? (Also PV) when you put the LT's on how much power did they give you and was it tuned? Thanks Alot!
Melting Slicks
Joined: Oct 2002
Posts: 2,492
Likes: 0
From: Williamson New York
You can put sims in the rear O2's but better fix is to have tuner turn them off- I don't know what my starting numbers were but with a Ported TB , LS6 intake, and blackwing I'm making 342 rwhp and 355 torque-- 
Thread Starter
Intermediate
Joined: Jun 2006
Posts: 35
Likes: 3
From: Atlanta Georgia
PV, those are good numbers. I was actually thinking of doing a Z06 intake. were you able to port the TB yourself? Thanks for the help. Did you put the intake on yourself or did you pay? If so what did u pay for the install? Thanks again.
