Spark plug wire laying on air pipe plumbing - problem?
Thread Starter
7th Gear
Joined: Aug 2001
Posts: 7
Likes: 0
From: Clovis CA
Spark plug wire laying on air pipe plumbing - problem?
I changed my plugs and wires. I switched to the Taylor Spiro Pro series. I noticed, today, that one of them (the plug on driver's side nearest the driver) lays on the air pipe plumbing off the exhause manifold. I can't reposition it to keep from contact. The air pipe plumbing gets pretty hot. Will this melt through the spark plug wire? If so, any suggestions, since I can't reposition it away from the piping?
Thanks for your help.
[Modified by Greenishade, 4:21 AM 8/28/2001]
Thanks for your help.
[Modified by Greenishade, 4:21 AM 8/28/2001]
Le Mans Master
Joined: Jul 2000
Posts: 7,758
Likes: 0
From: Fort Worth Texas
Cruise-In II Veteran
Cruise-In III Veteran
Re: Spark plug wire laying on air pipe plumbing - problem? (Greenishade)
I had this problem before. I ever so slightly used my muscles and bent the pipe outward. Only took about a 1/4 of an inch.
Be careful. If you break it dont blame me. Mine bent out pretty easily.
Be careful. If you break it dont blame me. Mine bent out pretty easily.
