after lowering...
Pro
Joined: Dec 2005
Posts: 699
Likes: 0
From: Vettemod.com For the C3 People
St. Jude Donor '06
Lowered to no bolts up front. Never heard any noise nor any problems. Going to Forum Cruise-in got caught in rain for about 20 miles. Turning off interstate in Nashville I thought my front end was fixen to come out/off and or brakes, I was freaking, it sounded like something really bad 
Still not sure if it was sway bar bushings, connecting rod bushings for steering, or the spring laying on swing arm. A day of cruisng in Bowling Green and the noise went away.
THis was the first and only time my car has been in rain, since I have owned it.
Still not sure if it was sway bar bushings, connecting rod bushings for steering, or the spring laying on swing arm. A day of cruisng in Bowling Green and the noise went away.
THis was the first and only time my car has been in rain, since I have owned it.
Le Mans Master
Joined: Aug 2000
Posts: 8,762
Likes: 2
From: Murphy TX
First and most typical suspension creaking cause by far is the swaybar bushings.
Possibly by lowering you rotated them and a non-lubed or rusted area is now rubbing the bushing. I'd pull 'em apart and put in some grease. If it stops then you know you've got it.
I grease the living heck out of mine, and then just wipe excess up after tightening. Quiet as can be for > year and many track days.
Possibly by lowering you rotated them and a non-lubed or rusted area is now rubbing the bushing. I'd pull 'em apart and put in some grease. If it stops then you know you've got it.
I grease the living heck out of mine, and then just wipe excess up after tightening. Quiet as can be for > year and many track days.
Racer
Joined: May 2006
Posts: 376
Likes: 0
From: Chesapeake Virginia
I lowered my car in the front with no bolts as well. I do notice a noise similiar to the one you described when making slow sharp turns but lately it has gone away. It must be the spring rubbing against the control arm. I wouldnt worry about it because I am not. 
Racer
Joined: May 2006
Posts: 376
Likes: 0
From: Chesapeake Virginia
Well if it really bothers you.....maybe you should get some thin rubber material and put it between the control arm and the spring and see if that makes the noise stop which I think it would. If that doesnt work then its probally your sway bar end link making the noise.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski