Sunvisor Wiring Harness-plug Help!
Thread Starter
Advanced
Joined: Jul 2005
Posts: 60
Likes: 1
From: Sonora California
Sunvisor Wiring Harness-plug Help!
I successfully removed my drivers-side sunvisor from it's mounting point per the instructions I found here on the forum, which went without a hitch. It is now hanging from the mounting hole by the electrical supply wires that power the visor lights. I fished out the harness plug from the mounting hole as it needs to be unplugged to separate the old sunvisor so you can plug in the new one. For the life of me, I cannot figure out how to unplug the harness it without ruining it. I know it must be super simple, but I'm ready to give up. I've pulled, pried and cussed to the point that I have a headache. Can anyone help me?? Surely somebody out there has been there, done that -
Team Owner
Joined: Dec 1999
Posts: 174,312
Likes: 1,217
From: Here
Pilot of Beer Force 1
Tampa Regional Coordinator
CI 4-5-6-7-8 Veteran
Organizer St. Jude Fundraiser
I believe in the Beer Fairy
mine came apart pretty easy....I know..not what you wanted to hear 
If I recall it has a little clip you need to pry up then it slides apart...but its been awhile so...
If I recall it has a little clip you need to pry up then it slides apart...but its been awhile so...
