Hi Beam alignment
Thread Starter
1st Gear
Joined: Mar 2006
Posts: 1
Likes: 0
Hi Beam alignment
Can I get some info on how to vertically align the high beams separate from the low beams on my '98? I've got my low's where I want them but my passenger side high beam is shooting into the ground.....
Drifting
Joined: Oct 2004
Posts: 1,384
Likes: 8
From: Southwest Virginia
Something is not right there. Both lights are mounted in the same housing and adjusted at the same time. Can't adjust one without the other. Make sure of which bulbs are burning and their location. Sounds like the wrong bulbs may be burning at the wrong time. Check to be sure the correct bulbs are installed. Or like StephenT said, check to make sure the bulb is seated well in the housing.
Safety Car
Joined: Jul 2001
Posts: 4,661
Likes: 67
From: Ocean Springs MS
Originally Posted by StephenT
Make sure the bulb is seated properly in the housing
one of the two bulbs is not in the socket right. As mentioned, there is only one alignment for the entire assembly. Reinstall both bulbs and make sure all the mounting tabs are in their notches.
