C5auto throttle controller module wiring
Thread Starter
Cruising
Joined: Aug 2006
Posts: 11
Likes: 0
C5auto throttle controller module wiring
I´m restoring a C5 with a big crash (It´s showed in this thread http://forums.corvetteforum.com/show....php?t=1483945 ) I need the wiring of one of the connectors of this throttle controller
If someone could take a photo from his controller I could make the wiring for the connector with the cut wires, which is the last step for do run the car, the engine start but doesn´t accelerates because these cut wires( the connector on the photo has been taken from a car with manual gearbox). The car has automatic gearbox, I´m not sure but I think that the wiring of this connector is diferent from the manual transmision.
If someone could take a photo from his controller I could make the wiring for the connector with the cut wires, which is the last step for do run the car, the engine start but doesn´t accelerates because these cut wires( the connector on the photo has been taken from a car with manual gearbox). The car has automatic gearbox, I´m not sure but I think that the wiring of this connector is diferent from the manual transmision.
Thread Starter
Cruising
Joined: Aug 2006
Posts: 11
Likes: 0
Yes in spain there aren´t too many vettes, and the official services don´t want sell nothing of info.On the other hand, if I´ll have the manual services, I´ll don´t ask for this, simply I would do the wiring.
Do you know where can I buy the manual service?
Do you know where can I buy the manual service?
Instructor
Joined: Dec 2001
Posts: 182
Likes: 0
From: TARZANA CA
Go to this site and join, about $30 per year. A wealth of information.
http://www.alldata.com/vehicle_owner/index.html
http://www.alldata.com/vehicle_owner/index.html
