Need Help...... Getting Code
Thread Starter
Pro
Joined: Jan 2003
Posts: 629
Likes: 0
From: Aberdeen MD
Need Help...... Getting Code
Can anybody help me with this code I am getting. It is P0135 and according to my code list it is Heated Oxygen Sensor (HO2S) Heater Circuit Bank 1 Sensor 1. I am also getting U1255 Serial data Line Malfunction. What are they and how do I correct the problem?
Thanks
Bobby
Thanks
Bobby
Instructor
Joined: Dec 2001
Posts: 182
Likes: 0
From: TARZANA CA
Advanced
Joined: Jun 2003
Posts: 81
Likes: 0
From: Alpharetta GA
I had the same problem once. Broken wire on the harness side that that heats the O2 to temp. (snipped by a careless mechanic cutting off a tie wrap, no big whoop) Could also be a bad sensor?
Last edited by MacC5; Aug 31, 2006 at 08:33 PM.
Team Owner
Joined: May 2004
Posts: 26,345
Likes: 231
From: SoCal
I just got this code today !!!!!!!
I did a some very hard canyon driving. Then I made two stops. When leaving the second stop the CEL came on with the P0135 code.
The link above says it trips the code when 2 consecutive codes starts with incorrect voltage is detected.
Recently had 402 engine installed so everything was apart. This was the first good workout (engine has about 1K miles on it)
Wonder if it will be wire or sensor......
DH
I did a some very hard canyon driving. Then I made two stops. When leaving the second stop the CEL came on with the P0135 code.
The link above says it trips the code when 2 consecutive codes starts with incorrect voltage is detected.
Recently had 402 engine installed so everything was apart. This was the first good workout (engine has about 1K miles on it)
Wonder if it will be wire or sensor......
DH
