Problems after CLB kit install
Thread Starter
Instructor
Joined: Sep 2006
Posts: 176
Likes: 0
From: Columbia MO
Problems after CLB kit install
I bought a Column lock bybass kit from Thunder racing, installed it and it fixed the column lock up perfectly.
But now, my turn sigals wont shut off by themselves and my horn doesnt work. I have about (4 months ago) installed a new turn signal assembly.
Anyone have an idea of what is causing the horn/signal malfunction??
Thanks
But now, my turn sigals wont shut off by themselves and my horn doesnt work. I have about (4 months ago) installed a new turn signal assembly.
Anyone have an idea of what is causing the horn/signal malfunction??
Thanks
Burning Brakes
Joined: Mar 2003
Posts: 1,156
Likes: 2
From: Arlington VA
I doubt the two issues are related. Maybe you moved some wires around or loosened a harness connector when unhooking the Column Lock harness. I would go back and check your work and wire harnesses from when you installed the turn signal. Good luck with it.
Advanced
Joined: Jul 2004
Posts: 62
Likes: 0
From: Vancouver WA.
Problems after CLB install
Sounds to me like the steering wheel is not close enough to the column to allow the horn button and the turnsignal canceler to function. Is It loose or can you move it forward and back. Try pushing it away from you and see if the horn will honk or the signal will cancel. Can't think of any other reason the turnsignals wouldn't cancel. Good luck
