Clutch Pedal Stop Installed - Writeup/Pics
Thread Starter
Race Director
Joined: Mar 2000
Posts: 17,602
Likes: 20
From: Palm City Florida
Originally Posted by BobbyG
Attacking his appearance because you don't like his sunglasses? 
Even Funnier because they are not sunglasses.... Those are Demon eyes... It's my Halloween Avatar... 
Safety Car
Joined: Jun 2003
Posts: 4,510
Likes: 240
From: Coconut Creek FL
Originally Posted by chuckster
Even Funnier because they are not sunglasses.... Those are Demon eyes... It's my Halloween Avatar... 
now that right there is funny!Good write up- been following your clutch adjust threads for a while...I like that stop idea...tough I have not had my clutch stick as of yet...I wonder if it has to do with wear some??? I only have 12K on my 2000 MN6...or I drive like an old lady!
Cheers!
Thread Starter
Race Director
Joined: Mar 2000
Posts: 17,602
Likes: 20
From: Palm City Florida
Originally Posted by byte_me
now that right there is funny!Good write up- been following your clutch adjust threads for a while...I like that stop idea...tough I have not had my clutch stick as of yet...I wonder if it has to do with wear some??? I only have 12K on my 2000 MN6...or I drive like an old lady!
Cheers!
Well honestly.. I have not had it too bad on my present stock clutch..(My previous one would hang up any time!) But that clutch is seriously just bad.. It slips over 4000rpms at WOT.. I felt that the the extra pedal travel we not good for the Clutch, Nor my time slips at the track...
I am having a new Cartek clutch put in this weekend and will keep the pedal stop simply to eliminate any un needed pedal travel.. Also to keep from overcentering the Clutch Springs...
Premium Supporting Vendor
Joined: Jan 2001
Posts: 17,681
Likes: 11
From: Central Jersey
Cruise-In II Veteran
Cruise-In III Veteran
Cruise-In V Veteran
Originally Posted by chuckster
As you know I have found a clutch pedal stop that is custom made by Carolina Clutch..
Team Owner
Joined: Oct 2001
Posts: 46,766
Likes: 5
From: Boynton Beach Florida
St. Jude Donor '07-'12, '20
Charlie are you boosting internet ideas again? I thought Mr. Gore warned you about that, shortly after HE INVENTED the interweb. Now get the damn thing fixed and get to the track. 
I thought Mr. Gore warned you about that, shortly after HE INVENTED the interweb. Now get the damn thing fixed and get to the track.
Thread Starter
Race Director
Joined: Mar 2000
Posts: 17,602
Likes: 20
From: Palm City Florida
Originally Posted by Chris@East Coast Supercharging
Great writeup Chuck.. just fyi.. we are the ones who designed and made this here in house..
Thanks Chris!! If you really did design that.. I like it!! Very well made!
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Thread Starter
Race Director
Joined: Mar 2000
Posts: 17,602
Likes: 20
From: Palm City Florida
Originally Posted by 16Again
Charlie are you boosting internet ideas again? I thought Mr. Gore warned you about that, shortly after HE INVENTED the interweb. Now get the damn thing fixed and get to the track.
I thought Mr. Gore warned you about that, shortly after HE INVENTED the interweb. Now get the damn thing fixed and get to the track. I am dropping my car off to Roger on Wed!!!!! Yahooooo I get to race again.. Hopefully in time for the next Vette vs. Mustang shootoutI need to put a quick 500 breakin miles on her..
Thread Starter
Race Director
Joined: Mar 2000
Posts: 17,602
Likes: 20
From: Palm City Florida
Originally Posted by hotwheels57
...it looks like a great idea...maybe the rubber caps from the hood adjustment stops would be better than the felt furniture pads?
I like that...
Premium Supporting Vendor
Joined: Jan 2001
Posts: 17,681
Likes: 11
From: Central Jersey
Cruise-In II Veteran
Cruise-In III Veteran
Cruise-In V Veteran
Originally Posted by chuckster
Thanks Chris!! If you really did design that.. I like it!! Very well made!
Thread Starter
Race Director
Joined: Mar 2000
Posts: 17,602
Likes: 20
From: Palm City Florida
Originally Posted by Chris@East Coast Supercharging
Yes we did, thanks for the compliment
Well that makes me glad to hear.. That means a reputable "Jersey Boy" came up with it!!
I Grew up and lived in Brick my whole life..
I moved to FL in 89....This is sort of a stealth product.. it needs to get more media attention...that is why I posted...
Le Mans Master
Joined: Jan 2006
Posts: 6,102
Likes: 2
From: Pinckney MI
St. Jude Donor '11
Thanks for the right up! I really need to do this as I have so much needless travel in my clutch. If I don't let it out just right, I get all kinds of shakes and noises; it looks like I don't know how to drive.
I really need to do this as I have so much needless travel in my clutch. If I don't let it out just right, I get all kinds of shakes and noises; it looks like I don't know how to drive.
Thread Starter
Race Director
Joined: Mar 2000
Posts: 17,602
Likes: 20
From: Palm City Florida
Originally Posted by berryj
Beautiful and elegant write up. You da man as always dude!!!
Enjoy that new clutch. Any word on John's beast rwhp #'s?
Enjoy that new clutch. Any word on John's beast rwhp #'s?
John went underground again...
Spoke to Roger today... Car is Done... 
I need to pick it up on Moday!!
