Options on 3" catbacks
Thread Starter
Melting Slicks
Joined: Oct 2002
Posts: 2,855
Likes: 0
Options on 3" catbacks
I have replaced my motor and exhaust system with kooks 1 7/8" and their 3" center section which includes the x pipe--I still have my stainless works 3" catbacks and wonder who else is making a set of 3"--does GHL make a set for the c5--
Team Owner
Joined: May 2005
Posts: 23,682
Likes: 9
From: Flagstaff Az.
3"
I took car to friend at muff shop with the R-T 3" cats and X pipe and he made up the rest with Dynamax mufflers- 3" inside by 16" long and the 3" tail pipes with 4" tips. You might talk to a muff shop in your area and see what they can do.
Former Vendor
Joined: May 2005
Posts: 3,749
Likes: 4
From: Valencia Ca
Originally Posted by NEPTUNEBILL
I have replaced my motor and exhaust system with kooks 1 7/8" and their 3" center section which includes the x pipe--I still have my stainless works 3" catbacks and wonder who else is making a set of 3"--does GHL make a set for the c5--
...SpinTech....
Racer
Joined: May 2003
Posts: 305
Likes: 0
From: Jonesboro Ga
Have the stainless works, after the kooks 3 " x pipe, VERY poor fit , had to cut and weld both sides, took 3 " out of the left side and had to rotate the tubing about 60 degrees to make them fit. , sound gr8 though , also heavy.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Premium Supporting Vendor
Joined: Oct 2001
Posts: 8,392
Likes: 573
From: Dallas Tx
St. Jude Vendor Donor '03-'04-'05-'06-'07-'08-'09-'10-'11
We just finished our 3" cat back mufflers. I will take some photos and get them posted up here this week.
We will also get some video installed on a car.
We also made them with a unique connection that will allow you to either bolt it up to the stock style flange or to slip fit over a 3" rear pipe like our headers have to make it a complete 3" system from the headers to the tips.
thanks
Lou Gigliotti LGM
We will also get some video installed on a car.
We also made them with a unique connection that will allow you to either bolt it up to the stock style flange or to slip fit over a 3" rear pipe like our headers have to make it a complete 3" system from the headers to the tips.
thanks
Lou Gigliotti LGM