Quick CL recall question
Thread Starter
Pro
Joined: Jun 2000
Posts: 639
Likes: 0
From: cincinnati, ohio
Quick CL recall question
I read through the FAQ but seem to be getting conflicting messages. I just had the 4006c recall done on my 2001 MN6. The question is--is the cl motor still supposed to function when the key is turned on /off even though the lock plate is removed? My column does not lock, but the lock motor still cycles with ignition on/off--is this correct or not?
Thanks
Scott
Thanks
Scott
Drifting
Joined: Mar 2005
Posts: 1,737
Likes: 0
From: Northern VA
Yes. If you have a CLB, it of course no longer functions because it is no longer connected 
You still need a CLB, IMHO. Even though your column cannot lock, if the car "thinks" it is locked, you will not be able to drive it...
You still need a CLB, IMHO. Even though your column cannot lock, if the car "thinks" it is locked, you will not be able to drive it...
Le Mans Master
Joined: Oct 2004
Posts: 9,369
Likes: 4
From: Zephyrhills, Florida
St. Jude Donor '06-'07-'08-'09-'10-'11-'12-'13
Drifting
Joined: Mar 2005
Posts: 1,737
Likes: 0
From: Northern VA
