New ET Street Radials!...
Mar 25, 2007 | 03:49 PM
Thread Starter
Instructor
Joined: Dec 2006
Posts: 156
Likes: 0
From: Elberton Georgia
New ET Street Radials!...
I just ordered a set of the new 315/35/17 ET Street Radials that I'm gonna put on a set of 17x11 Fikse for my 03 Z06. I've got 500+rwhp but still have the stock drivetrain.I've been debating on going ahead and getting a built diff with the 3.90 gear. I know I'm probably gonna have to replace the output shafts soon.Any opinions from the experienced croud on how they think these tires will perform?
Last edited by TaylorDawg03; Mar 25, 2007 at 07:12 PM .
Mar 25, 2007 | 03:57 PM
Le Mans Master
Joined: Jul 2005
Posts: 7,121
Likes: 3
From: Shreveport/Bossier Louisiana
St. Jude Donor '08
Mar 25, 2007 | 05:22 PM
Team Owner
Joined: Jul 2003
Posts: 20,474
Likes: 2
From: Detroit
I'd do the hardened output shaft (~$250) and a DTE differential strut brace (~$400) and call it good.
Mar 25, 2007 | 07:13 PM
Thread Starter
Instructor
Joined: Dec 2006
Posts: 156
Likes: 0
From: Elberton Georgia
Quote:
Originally Posted by
mdhmi
I'd do the hardened output shaft (~$250) and a DTE differential strut brace (~$400) and call it good.
I have the DTE brace already on and I have the left LPE hardened output shaft in my garage but haven't put it on yet.
Last edited by TaylorDawg03; Mar 26, 2007 at 04:50 PM .
Mar 26, 2007 | 08:08 AM
Race Director
Joined: Aug 1999
Posts: 16,935
Likes: 26
From: Lackey, my own dragstrip VA.
Virginia Events Coordinator
Cruise-In IV Veteran
Cruise-In V Veteran
Cruise-In VI Veteran
Cruise-In VII Veteran
NCM Ambassador
I ran the baby 275/40/17 on my 97' last month...............1.47 60' @ 10.82 at 125+ and very straight, nice soft tire
Mar 26, 2007 | 08:21 AM
Melting Slicks
Joined: Sep 2002
Posts: 2,329
Likes: 0
Mar 26, 2007 | 04:51 PM
Thread Starter
Instructor
Joined: Dec 2006
Posts: 156
Likes: 0
From: Elberton Georgia
Quote:
Originally Posted by
Irish Whiskey
Made by whom?
of course,Mickey Thompson.
Mar 26, 2007 | 05:33 PM
Safety Car
Joined: May 2004
Posts: 4,811
Likes: 2
From: Simpsonville SC
I just got some and ran them, LOve them!! Great tire, just need to upgrade my drivetrain.
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Mar 26, 2007 | 10:45 PM
Joined: Jan 2006
Posts: 5,479
Likes: 1,137
From: Port Saint Lucie FLORIDA & HONDURAS
i just bought a set of 275-40-17's......... i didnt know the others were out yet
oh well
Mar 27, 2007 | 09:43 AM
Race Director
Joined: Aug 1999
Posts: 16,935
Likes: 26
From: Lackey, my own dragstrip VA.
Virginia Events Coordinator
Cruise-In IV Veteran
Cruise-In V Veteran
Cruise-In VI Veteran
Cruise-In VII Veteran
NCM Ambassador
The 18" are not far away...........
If the 345s are not to much $$$..........I will be on those
Mar 27, 2007 | 12:02 PM
Burning Brakes
Joined: May 1999
Posts: 865
Likes: 4
From: troy, mi
I was told May '07 for the 18" sizes in an email from MT, lets hope so!!
Mar 27, 2007 | 02:08 PM
Drifting
Joined: Jun 2000
Posts: 1,577
Likes: 99
From: Dubai, UAE
Quote:
Originally Posted by
ALLTHROTTLE&NOBOTTLE
The 18" are not far away...........
If the 345s are not to much $$$..........I will be on those
me too
Iam in serious need for some big meat