Mod for stock thermostat,need help
Thread Starter
Racer
Joined: Jul 2000
Posts: 403
Likes: 0
From: Huntington Beach,California
Mod for stock thermostat,need help
There was a post ,not to long ago,about modifying your stock thermostat an adding a bb or ball bearing into it, an it makes it a 168.degree[give or take] thermostat.does anyone remember how it go's,or has a link to the old post.
T.I.A
T.I.A
Drifting
Joined: Oct 1999
Posts: 1,405
Likes: 0
From: Daly City, CA
Re: Mod for stock thermostat,need help (kendawg)
Here it is http://andrewb.speedware.com/thermo/thermo.htm
It worked for me just fine. I run at 181-183 on stock thermo
It worked for me just fine. I run at 181-183 on stock thermo
Burning Brakes
Joined: Aug 2000
Posts: 1,132
Likes: 1
From: Morganton, NC, USA
Re: Mod for stock thermostat,need help (ZAP)
I followed the directions and set up the valve so that it barely seats when the plunger is installed. I run 181 to 183 F same as SFYellow. :yesnod:
