The best forum member
Thread Starter
Melting Slicks
Joined: Mar 2006
Posts: 2,064
Likes: 4
The best forum member
I really dont know how to word this post, but here it goes.
There is a long time member here in C5; FLYNBYA2. Also goes by Joe.
I wont bore you with all the help he has given me with my vette, mods, maintenance, etc. His advice and help is always first rate. When he reads this he will probably get pizzed at me for posting, but I am grateful to him. See, I was starting to hate my car with all the little things that were building up after many track days and I was too darn tired to work them out myself.
Today he came to my house, "de-tracked" my car. Replaced the race seat, harness and hardbar with original. Swapped out the race pads, installed street pads. Bled the brakes with fresh Motul, after he swapped out my stock lines for stainless from Stop Tech. Fixed a few 'annoyances' that were builiding up.
I came home and there he was putting the finishing touches to my baby. I feel so confidant when Joe works on my car, I cant even begin to explain my appreciation.
I am lucky to have a shop of tools and lift in my garage but even luckier to have a friend like Joe.
While Joe is not free, he is reasonable. If any local dudes or gals need some TLC in the So Cal area ( I am in San Clemente) feel free to PM me or Joe at flynbya2.
He and your baby are always welcome at my home.
There is a long time member here in C5; FLYNBYA2. Also goes by Joe.
I wont bore you with all the help he has given me with my vette, mods, maintenance, etc. His advice and help is always first rate. When he reads this he will probably get pizzed at me for posting, but I am grateful to him. See, I was starting to hate my car with all the little things that were building up after many track days and I was too darn tired to work them out myself.
Today he came to my house, "de-tracked" my car. Replaced the race seat, harness and hardbar with original. Swapped out the race pads, installed street pads. Bled the brakes with fresh Motul, after he swapped out my stock lines for stainless from Stop Tech. Fixed a few 'annoyances' that were builiding up.
I came home and there he was putting the finishing touches to my baby. I feel so confidant when Joe works on my car, I cant even begin to explain my appreciation.
I am lucky to have a shop of tools and lift in my garage but even luckier to have a friend like Joe.
While Joe is not free, he is reasonable. If any local dudes or gals need some TLC in the So Cal area ( I am in San Clemente) feel free to PM me or Joe at flynbya2.
He and your baby are always welcome at my home.
Team Owner
Joined: Jan 2006
Posts: 20,800
Likes: 59
From: Tellico Village, Tn
St. Jude Donor '08
I really dont know how to word this post, but here it goes.
There is a long time member here in C5; FLYNBYA2. Also goes by Joe.
I wont bore you with all the help he has given me with my vette, mods, maintenance, etc. His advice and help is always first rate. When he reads this he will probably get pizzed at me for posting, but I am grateful to him. See, I was starting to hate my car with all the little things that were building up after many track days and I was too darn tired to work them out myself.
Today he came to my house, "de-tracked" my car. Replaced the race seat, harness and hardbar with original. Swapped out the race pads, installed street pads. Bled the brakes with fresh Motul, after he swapped out my stock lines for stainless from Stop Tech. Fixed a few 'annoyances' that were builiding up.
I came home and there he was putting the finishing touches to my baby. I feel so confidant when Joe works on my car, I cant even begin to explain my appreciation.
I am lucky to have a shop of tools and lift in my garage but even luckier to have a friend like Joe.
While Joe is not free, he is reasonable. If any local dudes or gals need some TLC in the So Cal area ( I am in San Clemente) feel free to PM me or Joe at flynbya2.
He and your baby are always welcome at my home.
There is a long time member here in C5; FLYNBYA2. Also goes by Joe.
I wont bore you with all the help he has given me with my vette, mods, maintenance, etc. His advice and help is always first rate. When he reads this he will probably get pizzed at me for posting, but I am grateful to him. See, I was starting to hate my car with all the little things that were building up after many track days and I was too darn tired to work them out myself.
Today he came to my house, "de-tracked" my car. Replaced the race seat, harness and hardbar with original. Swapped out the race pads, installed street pads. Bled the brakes with fresh Motul, after he swapped out my stock lines for stainless from Stop Tech. Fixed a few 'annoyances' that were builiding up.
I came home and there he was putting the finishing touches to my baby. I feel so confidant when Joe works on my car, I cant even begin to explain my appreciation.
I am lucky to have a shop of tools and lift in my garage but even luckier to have a friend like Joe.
While Joe is not free, he is reasonable. If any local dudes or gals need some TLC in the So Cal area ( I am in San Clemente) feel free to PM me or Joe at flynbya2.
He and your baby are always welcome at my home.
Since meeting him, I've always thought he was a class act!!
Thread Starter
Melting Slicks
Joined: Mar 2006
Posts: 2,064
Likes: 4
Heel & Toe
Joined: Dec 2006
Posts: 22
Likes: 0
From: Orange County CA
I really dont know how to word this post, but here it goes.
There is a long time member here in C5; FLYNBYA2. Also goes by Joe.
I wont bore you with all the help he has given me with my vette, mods, maintenance, etc. His advice and help is always first rate. When he reads this he will probably get pizzed at me for posting, but I am grateful to him. See, I was starting to hate my car with all the little things that were building up after many track days and I was too darn tired to work them out myself.
Today he came to my house, "de-tracked" my car. Replaced the race seat, harness and hardbar with original. Swapped out the race pads, installed street pads. Bled the brakes with fresh Motul, after he swapped out my stock lines for stainless from Stop Tech. Fixed a few 'annoyances' that were builiding up.
I came home and there he was putting the finishing touches to my baby. I feel so confidant when Joe works on my car, I cant even begin to explain my appreciation.
I am lucky to have a shop of tools and lift in my garage but even luckier to have a friend like Joe.
While Joe is not free, he is reasonable. If any local dudes or gals need some TLC in the So Cal area ( I am in San Clemente) feel free to PM me or Joe at flynbya2.
He and your baby are always welcome at my home.
There is a long time member here in C5; FLYNBYA2. Also goes by Joe.
I wont bore you with all the help he has given me with my vette, mods, maintenance, etc. His advice and help is always first rate. When he reads this he will probably get pizzed at me for posting, but I am grateful to him. See, I was starting to hate my car with all the little things that were building up after many track days and I was too darn tired to work them out myself.
Today he came to my house, "de-tracked" my car. Replaced the race seat, harness and hardbar with original. Swapped out the race pads, installed street pads. Bled the brakes with fresh Motul, after he swapped out my stock lines for stainless from Stop Tech. Fixed a few 'annoyances' that were builiding up.
I came home and there he was putting the finishing touches to my baby. I feel so confidant when Joe works on my car, I cant even begin to explain my appreciation.
I am lucky to have a shop of tools and lift in my garage but even luckier to have a friend like Joe.
While Joe is not free, he is reasonable. If any local dudes or gals need some TLC in the So Cal area ( I am in San Clemente) feel free to PM me or Joe at flynbya2.
He and your baby are always welcome at my home.
Thats alot in one day. I met him one time at the Block of Orange, guy knew everything. Smart dude, real
Will he do rear end swaps?
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Le Mans Master
Joined: Jul 2004
Posts: 7,727
Likes: 7
From: Twilight zone
St. Jude Donor '05-'06
Geez Ed:o ,
I don't know what to say really,but thanks for all the props guys.
And for letting me work on your lil' black wench
, it was my pleasure...
Besides, I needed to help get you in a better frame of mind about your car,so mission accomplished.I need a cruisin' buddy,ya know?....
Oh,and Sean........I will see you in the A.M!!
wow
I don't know what to say really,but thanks for all the props guys.
And for letting me work on your lil' black wench
, it was my pleasure...Besides, I needed to help get you in a better frame of mind about your car,so mission accomplished.I need a cruisin' buddy,ya know?....
Oh,and Sean........I will see you in the A.M!!
wow
Burning Brakes
Joined: Jan 2004
Posts: 933
Likes: 0
From: Inland Empire CA
Awesome. It's great to hear about people that help out others AND know their stuff. It would've been nice to have a hand on my build up... eh, it's almost done anyways... It better work too or else I'll have to go pound sand. 
Keep it up Joe.
Keep it up Joe.
Racer
Joined: Jul 2003
Posts: 493
Likes: 8
From: Santa clarita Ca
St. Jude Donor '13
Now if only I had a lift and a bunch of tools in MY garage....
Thread Starter
Melting Slicks
Joined: Mar 2006
Posts: 2,064
Likes: 4