Door Jam VIN Sticker Transfer
Thread Starter
Intermediate
Joined: Jun 2007
Posts: 39
Likes: 0
From: Dawsonville GA
Door Jam VIN Sticker Transfer
Can anyone suggest the best way to transfer my 2 original driver side Door Jam VIN and Tire/Wheel stickers to my new door shell? Want to keep as original as possible. Thank you!
Last edited by LRRLVETTE; Sep 6, 2007 at 09:14 PM.
Race Director
Joined: Jun 2005
Posts: 17,640
Likes: 1
From: Lenoir City TN
St. Jude Donor '08-'09-'10-'11
Have not done a Corvette but I always use a little heat and that allows the sticker to come off, touch the back as little as possible because the oil in your fingers will get on it and it will not stick. Peel off very slowly. Let us know how it goes.
Team Owner
Joined: May 2006
Posts: 21,473
Likes: 356
From: Palmdale, Ca----- 2009 Cyber Gray 4LT A6 F55 452 RWHP 422 RWTQ- RIP 1998 C5 734 RWHP & 585 RWTQ-----
Like stated above I'd use some heat! Perhaps a hairdryer or a heat gun made for removing stickers!
Be careful and go slow and don't over heat it!
You might have to get some glue to re-adhese it to the door jam - perhaps something 3M
Thanks,Matt
Be careful and go slow and don't over heat it!
You might have to get some glue to re-adhese it to the door jam - perhaps something 3M
Thanks,Matt
