Trac and active handling failure at high speed
Thread Starter
Pro
Joined: Aug 2007
Posts: 544
Likes: 0
From: Oxnard Ca
Trac and active handling failure at high speed
Can anyone tell me why I lose trac and active every time I reach 100mph+?
They work just fine for all types of driving, including hard throttle accel, but as soon as I hit around 100mph both warning lights come on and the display indicates service needed.
They work just fine for all types of driving, including hard throttle accel, but as soon as I hit around 100mph both warning lights come on and the display indicates service needed.
Racer
Joined: Jun 2005
Posts: 466
Likes: 0
From: Va. Beach VA
Common problem. You can find out more by doing a search. Start by checking your codes in the DIC and go from there. A difference of 9+ mph in one wheel speed sensor will through codes. Could be the sensor/hub or just a harness connection. The harnesses are interchangeable from side to side. Try swapping them if your codes indicate a problem in that area to eliminate the possibility of a bad sensor/hub. Probably just a harness or ground connection.
