a/c pulleys
Thread Starter
Melting Slicks
Joined: Sep 2002
Posts: 2,329
Likes: 0
a/c pulleys
replaced serpentine pulley and still have the squeaks. a/c pulleys look like a bear to remove from either above or below. No lift so I will be on my back for this one. Is the tensioner pulley the one that moves or is that the idler pulley. I'll try the moving one first. Scoggins Dickey price less than half the dealer charge.
Anything I need to know about the removal and install?? don't look easy!!
Anything I need to know about the removal and install?? don't look easy!!
Supporting Vendor
Joined: Jul 2003
Posts: 6,486
Likes: 2
From: http://www.mphparts.com 800-364-1975
The AC belt system is actually very easy to service from below. It's been a while since I've done it myself but if I recall correctly it took nothing more than a 13mm and 15mm socket to get the job done.
Drifting
Joined: May 2005
Posts: 1,590
Likes: 1
From: Littleton Colorado
If your Vette is an A4 then its a PIA because the tranny cooler lines run right in front to the AC idler and tensioner, no fun at all. Personally I did it from the top, but did try to do some stuff from the bottom.
